Overview
Evaluation Tools
Design Resources
Quality

MP2393

24V, 3A, 650kHz, Synchronous Step-Down Converter with PG, SS, in 1.6x2.1mm SOT583 Package

Active

Datasheet

Description

The MP2393 is a fully integrated, high-frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. The MP2393 offers a very compact solution that achieves 3A of continuous output current with excellent load and line regulation over a wide input range. The MP2393 uses synchronous mode operation for higher efficiency over the output current load range.

Constant-on-time (COT) control operation provides very fast transient response, easy loop design, and very tight output regulation.

Full protection features include short-circuit protection (SCP), over-current protection (OCP), under-voltage protection (UVP), and thermal shutdown.

The MP2393 requires a minimal number of readily available, standard, external components and is available in a space-saving SOT583 (1.6mmx2.1mm) package.

Features & Benefits

Wide 4.2V to 24V Operating Input Range
75mΩ/40mΩ Low R_DS(ON)Internal Power MOSFETs
200µA Low I_Q
High-Efficiency Synchronous Mode Operation
Power-Save Mode (PSM) at Light Load
Fast Load Transient Response
650kHz Switching Frequency
Programmable Soft-Start (SS) Time
Power Good (PG) Indication
Over-Current Protection (OCP) and Hiccup
Pre-Bias Start-Up
Thermal Shutdown
Available in a SOT583 (1.6mmx2.1mm) Package

Evaluation Tools

EV2393-TL-00A Evaluation Kit High-Efficiency, 650kHz,3A, 24V. Step-Down ConverterEvaluation Board

The EV2393-TL-00AEvaluation Board is designed to demonstrate the capabilities of MPS’ MP2393, a fully-integrated high-frequency, synchronous rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to achieve a 3A continuous output current over a wide input range, with excellent load and line regulation. The MP2393 has synchronous-mode operation for higher efficiency over the output current-load range.

Constant On-Time control operation provides very fast transient response and easy loop design as well as very tight output regulation.

Full protection features include SCP, OCP, UVP, and thermal shutdown.

The MP2393 requires a minimal number of readily-available, standard, external components and is available in a space-saving SOT583 (1.6mmх2.1mm) package.

$25.00
+ tax

Buy direct from MPS