The MP6412 is a load-switch controller used to turn the main-power P-channel MOSFET on and off. The MP6412 has a 2.2V to 12V operating input voltage range. The MP6412 is a space-saving solution for smartphones, tablets, and other portable device applications.
The MP6412 is equipped with reset and power sequence functions with a factory-programmable delay timer. The reset and power sequence are controlled by the RST0/RST1 and OFF signals. The MP6412 also has a system discharge path, shipping mode and charger insert detection feature.
The MP6412 is available in a UTQFN-10 (1.4mmx1.8mm) package.
Show moreShow less
Log in to your account
Create New Account
Log in to continue
A Plus account is required to perform this action.
Log in to your myMPS+ account or create one now.
Don’t have a myMPS+ account yet?
Get early access to new products, datasheets, and free samples.
The EV6412-QGU-00A is an evaluation board designed to demonstrate the capabilities of the MP6412, a load switch controller to turn on/off main power P-channel MOSFET. It covers a 2.2V to 12V operating voltage range. With its tiny package, the MP6412 provides a space-saving solution in smartphones and tablets, or other portable device applications.
The MP6412 is equipped with reset and power sequence functions, and a the factory-programmable delay timer. The reset and power sequence is controlled by RST0/RST1 and off signal. For mobile applications teh, MP6412 also has a system discharge path and charger insert detect feature.
The MP6412 is available in a space-saving, UTQFN-10 (1.4mmx1.8mm) package.