MP6401

MP6401

300mA LDO Linear Regulator with Integrated Reset Circuit

Datasheet

Description

The MP6401 combines a low-dropout linear regulator with an integrated reset circuit. It operates from a 2.5V to 5.5V input voltage and regulates the output voltage with 2% accuracy at 1.8V, 2.5V, 3.3V or adjustable value. It delivers up to 300mA of load current. By combining an LDO linear regulator with a reset circuit, these products can reduce cost and save space in compact portable devices such as cell phones, smart phones, PDAs, PMPs, and portable GPS devices. The MP6401 provides a push-pull, active-low that asserts when the regulator output voltage drops below the microprocessor supply threshold (-7.5% or -12.5% of nominal output voltage). Four reset delay time, 3.125ms, 25ms, 200ms and 1580ms can be selected. The MP6401 is available in 3mmx3mm TQFN8, 2mmx2mm TQFN6 and TSOT packages and is specified for operation from -40? to 85?.

Features & Benefits

Low Quiescent Current of 80? for Battery Powered Equipment
Low 114mV Dropout at 300mA Output
?% Accurate Output Voltage
Fixed Output Voltage Options of 1.8V, 2.5V or 3.3V
Adjustable Output Voltage from 1.229V to 5V Using an External Resistor Divider
15?RMS Ultra Low Noise Output
PSRR: 57dB at 1kHz
Input Reverse Current, Thermal and Short-Circuit Protection
Microprocessor Reset with Four Delay time Options
Push-Pull

Active Part Numbers:

MP6401DQT-18AD3 MP6401DQT-18BD3 MP6401DQT-25AD3 MP6401DQT-25BD3 MP6401DQT-33BD3 MP6401DGT-18AD3 MP6401DGT-18BD3 MP6401DGT-25AD3 MP6401DGT-25BD3 MP6401DGT-33BD3 MP6401DJ-18AD3 MP6401DJ-18BD3 MP6401DJ-25AD3 MP6401DJ-25BD3 MP6401DJ-33BD3