MP3924

MP3924

Quad-Port, IEEE 802.3af/at-Compliant PSE Controller for Power over Ethernet Applications

Datasheet

Description

The MP3924 is a quad-port, IEEE 802.3af/at-compliant, power sourcing equipment (PSE) controller for Power over Ethernet (PoE) applications.

The device has all IEEE 802.3af/at functions, including detection, single-event classification, two-event classification, current limiting, and disconnected load detection. All of the functions can be configured via the I²C to operate in automatic mode or software program mode.

The MP3924 features a 9-bit analog-to-digital converter (ADC) to monitor the current and voltage, an I²C interface for isolated controller communication, adjustable current limits, and configurable system functions. These provide flexibility for PoE applications.

The MP3924 is available in a QFN-32 (5mmx5mm) package.

Features & Benefits

IEEE802.3af/at Compliant
Quad-Port and 4-Bit Configurable I²C Address
0.25Ω Current-Sense Resistor
Automatic Mode
I²C Command Control Mode
Automatic Input Over-Power Shutdown
Internal VCC Power Supply
Three-Wire I²C Interface for Isolated Applications
Two Interrupt (INT) Pins for Interrupt Priority Selection
Disconnected DC Load Detection
Instantaneous Current/Voltage Readout
Thermal Protection
Available in a QFN-32 (5mmx5mm) Package

Active Part Numbers:

MP3924GU-Z MP3924GU-P

Meaning of P & Z

Evaluation Tools

EV3924-U-00A Evaluation Kit Quad-Port, IEEE 802.3af/at-Compliant PSE Controller for PoE Applications Evaluation Board

The EV3924-U-00A is an evaluation board designed to demonstrate the capabilities of the MP3924, a quad-port, IEEE 802.3af/at-compliant, power sourcing equipment (PSE) controller for power over Ethernet (PoE) applications.

The MP3924 has all the IEEE 802.3af/at functions, including detection, one-event classification, two-event classification, current limiting, and disconnected load detection. All of the functions can be configured via the I²C for automatic mode or software program mode.

The MP3924 features a 9-bit analog-to-digital converter (ADC) that monitors the current and voltage. It also includes an I²C interface for isolated controller communication, adjustable current limits, and configurable system functions.

The MP3924 is available in a QFN-32 (5mmx5mm) package.

$25.00
+ tax

Virtual Bench Pro 4.0

Graphical User Interface (GUI) Supported by MPS Used to Configure and Monitor Multiple MPS Digital Power Solutions with an I²C Interface