EVKT-MP2696B

The EVKT-MP2696B is an evaluation kit for the MP2696B, a Single-Cell Switching Charger with Power-Path Management, Boost Output and 3.5A Input Current Limit

Description

The EVKT-MP2696B is an evaluation kit for the MP2696B, a highly integrated, single-cell battery charger with a pass-through power path management function.

It is designed for use in lithium-ion or lithium-polymer battery charger applications. Its layout accommodates the most common capacitors. The default function of this board is preset for charge mode, and the full-charge voltage is preset to 4.2V for a single-cell lithium-ion battery.

Product Evaluated

MP2696BGQ

I2C-Controlled, Single-Cell Switching Charger with Power-Path Management, Boost Output, and 3.5A Input Current Limit

Features & Benefits

Flexible Switch-Mode Battery Charger
4V to 11V Operating Input Range
Up to 16V Sustainable Input Voltage
500mA to 3.5A Configurable Charge Current Limit
500mA to 3.6A Configurable Charge Current
3.6V to 4.45V Configurable Charge Regulation Voltage (±0.5% Accuracy)
Boost Converter with Up to 4A Output Current (±10% Accuracy)
Minimum Input Voltage Loop for Maximum Adapter Power Tracking
Ultra-Low 25μA Battery Discharge Current in Sleep Mode
Power Path Management
High Integration
Integrated Power Switches: IN to PMID block FET (25mΩ), PMID to SYS FET (15mΩ), HS-FET (15mΩ), LS-FET (14mΩ)
No External Blocking Diode
Safety:
Customizable JEITA Profile with Configurable Temperature Threshold
Charge Safety Timer
Input Over-Voltage Protection (OVP)
Battery Under-Voltage Protection (UVP)
SYS Over-Current Protection (OCP) and Short-Circuit Protection (SCP)
Thermal Limiting Regulator and Thermal Shutdown
System Power Output (SYS) Plug-In Detection and SYS No-Load Detection
SYS DP/DM Interface for BC1.2 and Non-Standard Adapters
Analog Voltage Output IB pin for Battery Current Monitoring
I2C Interface for Flexible Parameter Control and Status Reporting
Available in a Small QFN-21 (3mmx3mm) Package