The EV2608DQ-00A is an evaluation board for the MP2608, a dual input, linear, high?performance single cell Li-Ion battery charger. It accepts two power inputs, one from a USB (Universal BUS) and the other from an AC adapter.

By integrating high voltage input protection into the charger IC, the MP2608 can tolerate an input surge up to 28V.

The MP2608 features constant current (CC) and constant voltage (CV) charging modes with programmable charge currents (100mA to 1A), current blocking and trickle charge. The charge current for Adapter input can be programmed by an external resistor, while the charge current for USB input is pre-set at 450mA.

The device also provides programmable battery full threshold, thermal protection and charge status indications to the system.