EV2905-K-01A
You have a basic account.A myMPS+ account is needed.
Upgrade to myMPS+Product Description
The EV2905-K-01A is the evaluation board for the MP2905EK, a hysteretic synchronous step-down controller. It offers a very compact solution to achieve 1.2V, 10A continuous output current from a 10.8V to 13.2V input voltage range over a wide operation input voltage. An adjustable soft-start prevents inrush current at turn-on.
Hysteretic voltage control can provide fast transient without any loop compensation. Full protection features include OCP, output OVP, thermal shut down.
The EV2905-K-01A frequency is approximately 300kHz (12V input). Peak Current limit is set at 15A. The efficiency is up to 90% (12V input) with the supplied components.
Product Features
- 10A Output Current,1.2V Output Voltage
- Programmable Soft-Start
- Hiccup Current Limit and Thermal Shutdown
- Monotonic Startup into Prebias Output
- Startup Overvoltage Protection
- Enable/Shutdown
Parametrics
- IC Supported 1MP2905
3V-28V Input, Hysteretic Synchronous Step-Down Controller
The MP2905 is a hysteretic voltage-mode control, synchronous PWM buck controller. The output voltage can be regulated from 0.6V to 0.9*VIN. It achieves high output current over a wide input supply range from 3V-28V.?MP2905 integrates an internal LDO regulator that makes the controller function at a wide input supply.?Hysteretic voltage-mode control provides fast transient response without additional loop compensation.?An adjustable soft-start prevents inrush current at turn-on. The device senses high-side switch voltage drop for hiccup current limit and short current protection. The frequency is adjustable from 200kHz to 500kHz. The MP2905 is available in 10-pin MSOP package, provides a very compact system solution with minimal reliance on external components.
Log in to your account
Create New Account