Industrial Grade, 3A, 5.5V, 1.2MHz, 40mΩ IQ, COT Synchronous Step-Down Switcher AEC-Q100 Qualified
The MPQ2143H is a monolithic, step-down, switch-mode converter with internal power MOSFETs. It can achieve up to 3A continuous output current from a 2.5V to 5.5V input voltage with excellent load and line regulation. The output voltage can be regulated as low as 0.6V.
Constant-on-time control provides fast transient response and eases loop stabilization. Fault-condition protections include cycle-by-cycle current limiting and thermal shutdown.
The MPQ2143H is available in small QFN-10 package and requires only a minimal number of readily-available standard external components.
The MPQ2143H is ideal for a wide range of applications including high-performance DSPs, FPGAs, and portable instruments.
- Wide 2.5V to 5.5V Operating Input Range
- Output Voltage as Low as 0.6V
- 100% Duty Cycle in Dropout
- Up to 3A Output Current
- 80mΩ and 40mΩ Internal Power MOSFET Switches
- Default 2.0MHz Switching Frequency
- EN and Power-Good for Power Sequencing
- Cycle-by-Cycle Over-Current Protection
- Auto Discharge at Power Off
- Short-Circuit Protect with Hiccup Mode
- Stable with Low-ESR Output Ceramic Capacitors
- Available in QFN-10 (2mmx3mm) Package
- fsw (max) (kHz)2000
- Vin (min) (V)2.5
- Vin (max) (V)5.5
- Iout (max) (A)3
- Vfb (V)0.6
- Iq (typ) (mA)0.04
- PackageQFN-10 (2x3)
- Control ModeCOT
- Common FeaturesLight-Load Efficiency, Power Good, Synchronous Rectification
- Special Features100% Duty Cycle, Output Discharge/Soft Stop