MP44010

Active

Offline PFC Controller, Boundary Conduction Mode, Ultra Low Start Up current (15uA)



Learn about our Evaluation Kit
Talk to an Engineer or get a Quote

Product Description

The MP44010 is a boundary conduction mode PFC controller which can provide simple and high performance active power factor correction using minimum external components.  The output voltage is accurately regulated by a high performance voltage mode amplifier with an accurate internal voltage reference.  The precise adjustable output over-voltage protection greatly enhances the system reliability.   The on-chip R/C filter on the current sense pin can eliminate the external R/C filter.  The extremely low start-up current, quiescent current and the disable function can reduce the power consumption and result in excellent efficiency performance. The MP44010 is available in SOIC8 and DIP packages.

Product Features

  • Boundary Conduction Mode PFC Controller for Pre-regulator
  • Zero-crossing Compensation to Minimum THD of AC Input Current
  • Precise Adjustable Output Over-voltage Protection 
  • Ultra-low (15μA) Start-up Current.
  • Low (0.46mA) Quiescent Current
  • On-chip Filter on Current Sense Pin
  • Disable Function
  • -600/+800mA Peak Gate Drive Current
  • Available in SOIC8 and DIP-8 Packages

Parametrics

  • VCC (max) (V)22
  • Iop (mA)1.6
  • Iq (mA)0.46
  • Vac (min) (V)85
  • fsw (max) (kHz)150
  • Vac (max) (V)305
  • Vfb (V)2.5
  • Isw Limit (A)999
  • PackageDIP8, SOIC-8
  • TypeController
  • GradeCatalog
  • Control MethodBoost/Buck Boost
  • Power Range DefinedNo

Flyback PFC+2 Channel DC/DC 30W Offline WLED Driver

The EV44010-S+4688-N-01A is an evaluation board of MP44010 and MP4688 for 30W LED lighting driver.

The EV44010-S+4688-N-01A contains 2 stages: the first stage is Flyback PFC using MP44010 which can provide high power factor; the second stage is 2-channel DC/DC using MP4688 and every channel can deliver 15W/350mA for LED.

MP44010 is a boundary conduction mode PFC controller which can provide simple and high performance active power factor correction using minimum external components.

MP4688 is a high voltage input step-down switching regulator to deliver a constant current to LED. The hysteresis current mode control is applied for very fast response.

The EV44010-S+4688-N-01A can meet the Class C standard of IEC61000-3-2 and EN55015 standard.

$25.00 + tax



30W Output, 85V-265V AC Input Single Stage Offline LED Driver

The EV44010-S-00B is a single stage offline evaluation board of MP44010 and MP26085 for 30W LED lighting driver.

MP44010 is a boundary conduction mode PFC controller which can provide simple and high performance active power factor correction using minimum external components.

MP26085 is a controller which can provide constant current control and over voltage protection.

The board involves LED dimming functions with two different options. One is PWM dimming and the other is 0-10V dimming.

The EV44010-S-00B can meet the Class C standard of IEC61000-3-2 and EN55015 standard.

$25.00 + tax



100W LED Driver Evaluation Board

The EV44010-S+HR1001-S-01A is a general purpose evaluation board of MP44010, HR1001B, MP6922 and MP174 for 100W LED driver application.

The MP44010 is a boundary conduction mode PFC controller which can provide simple and high performance active power factor correction with minimum external components.

The HR1001B is an enhanced LLC controller which provides new features of adaptive dead time adjustment (ADTA) and capacitive mode protection (CMP)

The MP6922 is a dual fast turn-off intelligent rectifier to drive two N-CH power MOSFETs in LLC resonant converters for synchronous rectification.MP6922 has a light-load function to latch-off the gate driver at light load condition.

The MP174 is a primary-side regulator that provides accurate constant voltage (CV) regulation without opto-coupler.

The EV44010-S+HR1001-S-01A provides up to 100W output power and operates with ultra wide input range from 90V to 305V. Besides, the EV44010-S+HR1001-S-01A has output fault protections, such as short circuit protection, over voltage protection. It also can meet the Class C standard of IEC61000-3-2 and EN55015 standard.

$25.00 + tax



90W LED Driver Evaluation Board

The EV44010-S+HR1000A-S-01C is a general purpose evaluation board of MP44010, HR1000A, MP26085 and MP100 for 90W LED driver application.

MP44010 is a boundary conduction mode PFC controller which can provide simple and high performance active power factor correction with minimum external components.

HR1000A is a controller specific for the resonant half-bridge topology with two channels of 50% complementary duty cycle outputs driving signals.

MP26085 is a voltage and current control IC integrated a precision voltage reference and a current source, which is suitable for battery charger, second controller of switching regulator systems, and other types of application required an accurate voltage and current control systems.

MP100 is a compact, inductor-less, good-efficiency, off-line regulator. It steps down the AC line voltage to an adjustable DC output. It is a simple solution to provide a bias voltage to ICs in off-line applications.

The EV44010-S+HR1000A-S-01C provides up to 90W output power and operates with ultra wide input range from 100V to 305V. Besides, the EV44010-S+HR1000A-S-01C has output fault protections, such as short circuit protection, over voltage protection. It also can meet the Class C standard of IEC61000-3-2 and EN55015 standard.

$25.00 + tax


Quality Policy, Certificates & Reliability Reports
All MPS parts are lead-free, halogen-free and adhere to the RoHS directive. See Environmental section for details.