EV3373-M-00A

アクティブ

8-String, Step-Up WLED Controller with External Transistor

  • 個数 価格
  • 1
    ¥10,865.00 /単位

在庫あり

4~7営業日程度で到着
配送料1注文につき5ドルのみ


評価ボード詳細をご覧ください。
エンジニアにコンタクト、もしくは見積もり入手

製品説明

The MP3373 is a step-up controller with 8-channel external current sources designed for driving the WLED arrays for large-sized LCD panel backlighting applications. The device employs peak current mode, fixed-frequency architecture to provide robust operation with 9V to 40V input supply. The switching frequency is programmable by an external frequency setting resistor.

The MP3373 integrates a constant current control circuit to regulate each LED string current to the programmed value set by an external resistor. The current matching can achieve 1.2% regulation accuracy between strings. Its low 200mV regulation voltage on LED current sources reduces power loss and improves efficiency. To reduce inrush current and the stress of components, the MP3373 employs phase-shift PWM dimming mode, which can be disabled by pulling the PSEN pin to GND.

The device also includes UVLO, LED short/open protection, inductor/diode short protection, and thermal shutdown protection. All fault statuses are indicated by the fault flag signal.

The MP3373 is flexible for extending LED channels with two or three ICs in parallel, sharing one power stage. It is available in TSSOP-28 and SOIC-28 packages.

製品の特長

  • 9V to 40V Input Voltage Range
  • 8-Channel LED Strings with External Current Balance
  • 1.2% Current Matching Accuracy between Strings
  • Programmable Switching Frequency
  • External PWM Dimming
  • Selectable Phase-Shift Function in PWM DIM Mode
  • Open/Short LED Protection
  • Short Inductor/Diode Protection
  • Programmable Over-Voltage Protection
  • Thermal Shutdown
  • Fault Flag Output
  • Extendable LED Channels, Sharing One Set of Power Stage
  • Available in TSSOP-28 and SOIC-28 Packages

パラメータ


8-Channel 350mA/ch Boost WLED Controller with Phase Shift and Ext. Current Sink BJTs

The MP3373 is a step-up controller with 8-channel external current sources designed for driving the WLED arrays for large size LCD panel backlighting applications. The MP3373 employs peak current mode, fixed frequency architecture to provide robust operation with 9V to 40V input supply. The switching frequency is programmable by an external frequency setting resistor. The MP3373 integrates the constant current control circuit to regulate each LED string current to the programmed value set by an external resistor. And the current matching can achieve 1.2% regulation accuracy between strings. Its low 200mV regulation voltage on LED current sources reduces power loss and improves efficiency. To reduce inrush current and the stress of components, MP3373 employs the phase shift PWM dimming mode which can be disabled by pulling PSEN pin to GND. MP3373 also includes UVLO, LED short/open protection, inductor/diode short protection and thermal shut down protection. All these faults are indicated by the fault flag signal. The MP3373 is flexible for extending LED channels with two or three ICs in parallel with sharing one power stage. It is available in TSSOP-28 and SOIC-28 packages.

品質方針、証明書および信頼性レポート
すべてのMPS部品は鉛フリー、ハロゲンフリーで、RoHS指令に準拠しています。詳細については、環境セクションを参照してください。