24V, 2A, 1.5MHz, Synchronous, Step-Down LED Driver
Session Titefor popup
The MP23701 is a 24V, monolithic, synchronous, step-down, white LED driver with a built-in power MOSFET and rectifier. The MP23701 can achieve up to 2A of continuous output current with excellent load and line regulation. Peak-current mode operation provides fast transient response and easy loop stabilization.
The MP23701 implements deep analog dimming. Full protection features include cycle-by-cycle peak-current limiting, output short-circuit protection (SCP), open LED protection, NTC thermal protection, and thermal shutdown.
The MP23701 requires a minimal number of readily available, standard, external components and is available in a UTQFN-8 (1.5mmx2.5mm) package.
- もっと見る Show less
Log in to your account
- 4.2V to 24V Wide Input Range
- Synchronous Step-Down Converter
- 100mΩ Internal High-Side Power MOSFET
- 80mΩ Internal Low-Side Synchronous Rectifier
- Peak-Current Mode Control
- Up to 2A Continuous Output Current
- 100mV Feedback Voltage
- Up to 97% Efficiency
- Fixed 1.5MHz Switching Frequency
- Analog Dimming
- Cycle-by-Cycle Current Limit
- Inherent LED Open Protection
- Output Short-Circuit Protection (SCP)
- NTC Thermal Protection
- Thermal Shutdown
- Auto-Restart Function
- Available in a UTQFN-8 (1.5mmx2.5mm) Packages
EV23701-QEU-00A Evaluation Kit High-Efficiency, Synchronous Step-Down LED Driver Evaluation Board
The EV23701-QEU-00A evaluation board is designed to demonstrate the capabilities of the MP23701. The MP23701 is a 24V, monolithic, synchronous step-down LED driver with a built-in power MOSFET and rectifier. It achieves up to 2A of continuous output current with excellent load and line regulation in a tiny UTQFN-8 (1.5mmx2.5mm) package. Peak current mode operation provides fast transient response and eases loop stabilization.
The EV23701-QEU-00A is typically designed for driving 1 to 2 WLEDs in series LED load with a 1A LED current across a wide 4.2V to 24V input range.
The EV23701-QEU-00A has high performance in efficiency, line/load regulation, and deep analog dimming. Fault condition protections include cycle-by-cycle peak current limiting, output short circuit protection, open LED protection, NTC thermal protection, and thermal shutdown.