MPQ8634A

アクティブ

16V, 12A, Sync, Step-Down Converter with Adjustable Current Limit, Programmable Frequency, and Voltage Tracking



評価ボード詳細をご覧ください。
エンジニアにコンタクト、もしくは見積もり入手

製品説明

The MPQ8634A is a fully integrated, high-frequency, synchronous, buck converter. The MPQ8634A offers a very compact solution that achieves up to 12A output current with excellent load and line regulation over a wide input supply range. The MPQ8634A operates at high efficiency over a wide output current load range.

The MPQ8634A adopts an internally compensated constant-on-time (COT) control mode that provides fast transient response and eases loop stabilization.

The operating frequency can be set to 600kHz, 800kHz, or 1000kHz easily with MODE configuration, allowing the MPQ8634A frequency to remain constant regardless of the input/output voltages.

The output voltage start-up ramp is controlled by an internal 1.5ms timer. It can be increased by adding a capacitor on TRK/REF. An open-drain power good (PGOOD) signal indicates when the output is within its nominal voltage range. PGOOD is clamped at around 0.7V with an external pull-up voltage when the input supply fails to power the MPQ8634A.

Fully integrated protection features include over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), and over-temperature protection (OTP).

The MPQ8634A requires a minimal number of readily available, standard, external components and is available in a QFN-21 (3mmx4mm) package.

製品の特長

  • Wide Input Voltage Range:
    • 2.85V to 16V with External 3.3V VCC Bias
    • 4V to 16V with Internal VCC Bias or External 3.3V VCC Bias
  • Differential Output Voltage Remote Sense
  • Programmable Accurate Current Limit Level
  • 12A Output Current
  • Low RDS(ON) Integrated Power MOSFETs
  • Proprietary Switching Loss Reduction Technique
  • Adaptive COT for Ultrafast Transient Response
  • Stable with Zero ESR Output Capacitor
  • 0.5% Reference Voltage over  0°C  to +70°C Junction Temperature Range
  • 1% Reference Voltage from -40°C to +125°C Junction Temperature Range
  • Pin-Selectable Pulse-Skip Mode or Forced CCM Operation
  • Excellent Load Regulation
  • Output Voltage Tracking
  • Output Voltage Discharge
  • PGOOD Actively Clamped at a Low Level during Power Failure
  • Programmable Soft-Start Time from 1.5ms
  • Pre-Bias Start-Up
  • Selectable Switching Frequency from      600kHz, 800kHz, and 1000kHz
  • Latch-Off OCP, UVP, UVLO, Thermal Shutdown, and Latch-Off for OVP
  • Output Adjustable from 0.9V to 90%*VIN, up to 6V Max
  • Available in a QFN-21 (3mmx4mm) Package

パラメータ

  • fsw (max) (kHz)1000
  • Vin (min) (V)2.7
  • Vin (max) (V)16
  • Iout (max) (A)12
  • Vfb (V)0.9
  • Iq (typ) (mA)0.65
  • GradeIndustrial
  • PackageQFN-21 (3x4)
  • Control ModeCOT
  • Common FeaturesExternal Soft Start, Light-Load Efficiency, Power Good, Synchronous Rectification
  • Special FeaturesDifferential Output Voltage Remote Sense, Output Discharge, Precision Reference Voltage, Programmable Current Limit, Programmable Frequency, Voltage Tracking

High Efficiency 16V, 12A Synchronous Step-Down Converter Evaluation Board

The EVQ8634A-LE-00A is an evaluation board for the MPQ8634A, a high efficiency, monolithic, synchronous step-down converter.

The EV board can deliver 12A continuous load current over a wide operating input range. High efficiency can be achieved over a wide output current load range.

The MPQ8634A adopts internally compensated constant-on-time (COT) control mode that provides fast transient response and eases loop stabilization.

This EV board can be turned on or off via a remote ON/OFF input (EN) that is referenced to ground. This input is compatible with popular logic devices.

$25.00 + tax


品質方針、証明書および信頼性レポート
すべてのMPS部品は鉛フリー、ハロゲンフリーで、RoHS指令に準拠しています。詳細については、環境セクションを参照してください。