18V, 3A, 650kHz, Synchronous Step-Down Converter With PG, SS, and Forced CCM in SOT583 (1.6x2.1mm) Package
The MP2333C is a fully integrated, high-frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. The MP2333C offers a very compact solution that achieves 3A of continuous output current with excellent load and line regulation over a wide input range. The MP2333C uses synchronous mode operation for higher efficiency over the output current load range.
Constant-on-time (COT) control operation provides very fast transient response, easy loop design, and very tight output regulation.
Full protection features include short-circuit protection (SCP), over-current protection (OCP), under-voltage protection (UVP), and thermal shutdown.
The MP2333C requires a minimal number of readily available, standard, external components and is available in a space-saving SOT583 package
- Wide 4.2V to 18V Operating Input Range
- 75mΩ/40mΩ Low RDS(ON) Internal Power MOSFETs
- 200µA Low IQ
- High-Efficiency Synchronous Mode Operation
- Fast Load Transient Response
- 650kHz Switching Frequency
- Forced PWM Operation
- Programmable Soft-Start Time
- Power Good (PG) Indication
- Over-Current Protection (OCP) and Hiccup
- Pre-Bias Start-Up
- Thermal Shutdown
- Available in a SOT583 (1.6mmx2.1mm) Package
- fsw (max) (kHz)650
- Vin (min) (V)4.2
- Vin (max) (V)18
- Iout (max) (A)3
- Isw Limit (typ) (A)4
- Vfb (V)0.805
- Iq (typ) (mA)0.2
- Regulated Outputs1
- Vout (max) (V)13
- Vout (min) (V)0.8
- Control ModeCOT
- Common FeaturesExternal Soft Start, Forced CCM, Power Good, Synchronous Rectification
High-Efficiency, 650kHz, 3A, 18V. Step-Down ConverterEvaluation Board
The EV2333C-TL-00AEvaluation Board is designed to demonstrate the capabilities of MPS’ MP2333C, a fully-integrated high-frequency, synchronous rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to achieve a 3A continuous output current over a wide input range, with excellent load and line regulation. The MP2333C has synchronous-mode operation for higher efficiency over the output current-load range.
Constant On-Time control operation provides very fast transient response and easy loop design as well as very tight output regulation.
Full protection features include SCP, OCP, UVP, and thermal shutdown.
The MP2333C requires a minimal number of readily-available, standard, external components and is available in a space-saving SOT583 (1.6mmх2.1mm) package.
￥2,653.00 + tax