オーバービュー
Evaluation Tools
Quality

MP2696A

I²C-Controlled, Single-Cell Switching Charger with Power-Path Management and 3.6A Boost Output

新規

概要

The MP2696A is a highly integrated, flexible, switch-mode battery-charging, power-path management device designed for a single-cell Li-ion and Li-polymer battery to be used in a wide range of portable applications.

The MP2696A integrates three battery-charging phases: pre-charge, constant-current, and constant-voltage charge. This device also manages the input power source through input current limit regulation and minimum input voltage regulation.

The MP2696A can switch to boost mode to generate the system power output from the battery.

The MP2696A has an integrated IN to SYS pass-through path to pass the input voltage to the system.

Using an I²C interface, the host can flexibly program the charge and boost parameters. The device operating status can also be read in the registers.

Safety features include SYS short-circuit protection, input over-voltage protection, battery under-voltage protection, thermal shutdown, and JEITA battery temperature monitoring.

The MP2696A is available in a QFN-21 (3mmx3mm) package.

Features & Benefits

4.0V to 11V Operation Voltage Range
Up to 16V Sustainable Input Voltage
500mA to 3.6A Programmable Charge Current
3.6V to 4.45V Programmable Charge Regulation Voltage with ±0.5% Accuracy
100mA to 3A Programmable Input Current Limit with ±10% Accuracy
Minimum Input Voltage Loop for Maximum Adapter Power Tracking
Ultra-Low 25μA Battery Discharge Current in Idle Mode
Boost Converter w/ Up to 3.6A Output Current:
- Programmable Output Current Limit Loop
- Programmable Boost Output Voltage
- USB Output Cable Compensation
- Programmable Inductor Peak Current Limiting
Comprehensive Safety Features
- Fully-Customizable JEITA Profile with Programmable Temperature Threshold
- Charge Safety Timer
- Input Over-Voltage Protection
- Thermal Shutdown
- SYS Over-Current and Short Protection
- Analog Voltage Output IB Pin for Battery Current Monitoring
SYS Plug-In Detection
SYS No Load Detection
SYS DP/DM Interface for BC1.2 and Non-Standard Adapters
Status and Fault Monitoring
Available in a QFN-21 (3mmx3mm) Package

Evaluation Tools

EVKT-MP2696A Evaluation Kit Evaluation kit for the MP2696A, a highly-integrated single-cell Li-Ion/Li-Polymer battery charger with pass-through power path management function.

The EVKT-MP2696A is an evaluation kit for the MP2696A. This board is designed for MP2696A which is a highly-integrated single-cell Li-Ion/Li-Polymer battery charger with pass-through power path management function. And layout accommodates most commonly used capacitors. The default function of this board is preset for charger mode and the charge full voltage is preset to 4.200V for 1 cell Li-Ion battery.

￥10,865.00
+ tax

EV2696A-Q-00B

I²C Controlled Single Cell Switching Charger with Power Path Management and 3A Boost Output for sub-battery applications

EV2696A-Q-00A

Single Cell Switching Charger with Power Path Management and 3A Boost Output for power bank applications

EVKT-USBI2C-02

Communication Interface Device USB to I²C/PMBus, included with product evaluation kit or can be purchased separately.

Buy direct from MPS