MP2637

アクティブ
2.5A Single Cell Switch Mode Battery Charger with Power Path Management (PPM) and 2.4A Boost Current with Trickle Timer


評価ボード詳細をご覧ください。
エンジニアにコンタクト、もしくは見積もり入手

製品説明

The MP2637 is a highly-integrated, flexible, switch-mode battery charger with system power path management, designed for single-cell Li-ion or Li-Polymer batteries used in a wide range of applications. The MP2637 can operate in both charge mode and boost mode to allow full system and battery power management. When input power is present, the device operates in charge mode. It automatically detects the battery voltage and charges the battery in three phases: trickle current, constant current and constant voltage. Other features include charge termination and auto-recharge. This device also integrates both input current limit and input voltage regulation in order to manage input power and meet the priority of the system power demand. In the absence of an input source, the MP2637 switches to boost mode through the MODE pin to power the SYS pins from the battery. The OLIM pin programs the output current limit in boost mode. The MP2637 also allows for output short circuit protection to completely disconnect the battery from the load in the event of a short circuit fault. Normal operation will recover as soon as the short circuit fault is removed. The MP2637 provides full operating status indication to distinguish charge mode from boost mode. To guarantee safe operation, the MP2637 limits the die temperature to a preset value of 120oC. Other safety features include input over-voltage protection, battery over-voltage protection, thermal shutdown, battery temperature monitoring, and

製品の特長

  • Up to 16V Sustainable Input Voltage
  • 4.5V-to-6V Operating Input Voltage Range
  • Power Management function, Integrated Input-Current Limit, Input Voltage Regulation
  • Up to 2.5A Programmable Charge Current
  • Trickle-Charge Function
  • Selectable 4.2V/ 4.35V Charge Voltage with 0.5% Accuracy
  • Negative Temperature Coefficient Pin for Battery Temperature Monitoring
  • Programmable Timer Back-Up Protection
  • Thermal Regulation and Thermal Shutdown
  • Internal Battery Reverse Leakage Blocking
  • Integrated Over Voltage Protection and Over Current Protection for Pass-Through Path
  • Reverse Boost Operation Mode for System Power
  • Up to 2.4A Programmable Output Current Limit for Boost Mode
  • Integrated Short Circuit Protection and Output Over Voltage Protection for Boost Mode

パラメータ

  • Operating Vin (min) (V)4.5
  • Operating Vin (max) (V)6
  • Absolute Vin (max) (V)20
  • Series Cells1
  • GradeCatalog
  • Special FeaturesBatt NTC Monitor, Cell OCP, Input Bypass Power Path, Power Bank Output Mode, Thermal Regulation, USB OTG (Boost Mode), VIN Regulation
  • NVDCNo
  • Vbatt (max) (V)4.35
  • Vbatt (min) (V)4.2
  • Battery TypeLi-Ion, Li-Polymer
  • Iotg (A)2.4
  • Iin (max) (A)2.7
  • Icharge (max) (A)2.5
  • Votg (max) (V)5
  • TopologyBuck
  • fsw (kHz)600
  • Control InterfaceStandalone
  • PackageQFN-24 (4x4)
  • TimerYes
  • NTC MonitoringYes
  • EN ControlNo
  • Charge Status Yes

Full-Power-Management IC For Single-Cell Battery System

The EV2637-R-00A is the evaluation board designed to demonstrate the capabilities of MPS’ MP2637, a highly-integrated, flexible switch-mode battery charge management and system power path management device for a single-cell Li-ion and Li-Polymer battery used in a wide range of portable applications.

EV2637 uses two operating modes—charge mode and boost mode—to allow management of system and battery power based on the state of the input.

When input power is present, the board charges a single-cell battery with a programmable charge current of up to 2.5A.

In the absence of an input source, the board switches to boost mode through the MODE pin to power the SYS pins from the battery with a current of up to 2.1A.

The evaluation board provides full-operating-status indicators to distinguish charge mode from boost mode.

To guarantee safe operation, the EV2637 has input-over-voltage protection, battery over-voltage protection, thermal shutdown, battery-temperature monitoring, and a programmable timer to prevent prolonged charging of a dead battery.

¥2,716.25 + tax


品質方針、証明書および信頼性レポート
すべてのMPS部品は鉛フリー、ハロゲンフリーで、RoHS指令に準拠しています。詳細については、環境セクションを参照してください。