MP2615B

アクティブ

2A, 1 Cell Li-Ion Battery Charger in 3mmx3mm Package



評価ボード詳細をご覧ください。
エンジニアにコンタクト、もしくは見積もり入手

製品説明

The MP2615B is a monolithic switching charger for a 1 cell lithium-Ion or lithium-Polymer battery packed with built-in power MOSFETs. It’s able to achieve up to 2A charge current which can be programmed via an accurate sense resistor over the whole input range.
MP2615B regulates the charge current and full battery voltage using two control loops to realize high accuracy constant current (CC) charge and constant voltage (CV) charge.
Thanks to the constant-off-time (COT) mode control, 99% duty cycle can be achieved when battery voltage is close to the input voltage to keep the charge current always at a relative high level.
Battery temperature and charging status are always monitored for each condition. Two status monitor output pins are provided to indicate the battery charging status and input power status. The MP2615B also features internal reverse blocking protection.
The MP2615B is available in QFN-16 (3mmx3mm) package. 

製品の特長

  • 4.5V to 18V Operating Input Voltage
  • Up to 99% Duty Cycle Operation
  • Up to 2A Programmable Charging Current
  • ±0.75% Full Battery Voltage Accuracy
  • 4.03V and 3.99V Selection for Full Battery Voltage
  • Full Integrated Power Switches
  • Internal Loop Compensation
  • No External Reverse Blocking Diode Required
  • Preconditioning for Fully Depleted Battery
  • Charging Operation Indicator
  • Programmable Safety Timer
  • Thermal Shutdown Protection
  • Cycle-by-Cycle Over Current Protection
  • Battery Temperature Monitor and Protection

パラメータ

  • Operating Vin (min) (V)3.95
  • Operating Vin (max) (V)18
  • Absolute Vin (max) (V)23
  • Series Cells1
  • GradeCatalog
  • Special FeaturesThermal Shutdown
  • NVDCNo
  • Vbatt (max) (V)4.03
  • Vbatt (min) (V)3.93
  • Battery TypeLi-Ion, Li-Polymer
  • Icharge (max) (A)2
  • TopologyBuck
  • fsw (kHz)760
  • Control InterfaceStandalone
  • PackageQFN-16 (3x3)
  • TimerYes
  • NTC MonitoringYes
  • EN ControlYes
  • Charge Status Yes

2A, 1- or 2-Cell Li-Ion Battery Charger in 3mmx3mm Package

The EV2615-Q-00A is an evaluation board for the MP2615, a switching charger for 1- or 2-cell Lithium-ion or Lithium-polymer batteries, packed with built-in power MOSFETs. It is able to achieve up to 2A of charge current, which can be programmed via an accurate current-sense resistor over the whole input range.

The MP2615 regulates the charge current and full battery voltage using two control loops to realize high accuracy constant current (CC) charge and constant voltage (CV) charge. Thanks to the COT mode control, a 99% duty cycle can be achieved when the battery voltage is close to the input voltage to keep the charge current always at a relatively high level.

Battery temperature and charging status are always monitored for each condition. Two status monitor output pins are provided to indicate the battery charging status and input power status. The MP2615 also features internal reverse blocking protection.

¥2,716.25 + tax


品質方針、証明書および信頼性レポート
すべてのMPS部品は鉛フリー、ハロゲンフリーで、RoHS指令に準拠しています。詳細については、環境セクションを参照してください。