- Evaluation Tools
1.1MHz Switching Li-Ion Charger, up to 90% Efficiency
Session Titefor popup
The MP2610 is a monolithic switching charger for 1 or 2 cells Li-Ion battery packs with a built-in internal power MOSFET. It achieves up to 2A charge current with current mode control for fast loop response and easy compensation. The charge current can be programmed by sensing the current through an accurate sense resistor. MP2610 regulates the charge current and charger voltage using two control loops to realize high accuracy CC charge and CV charge. Fault condition protection includes cycle by cycle current limiting and thermal shutdown. Other safety features include battery temperature monitoring, charge status indication, and programmable timer to cease the charging cycle. The MP2610 requires a minimum number of readily available standard external components. The MP2610 is available in 4mm×4mm 16-pin QFN package.
- もっと見る Show less
Log in to your account
Features & Benefits
- Charges 1/2 - cell Li-Ion battery packs
- Wide 5V to 24V Operating Input Range
- Up to 2A Programmable Charging Current
- ±0.75% VBATT Accuracy
- 0.2Ω Internal Power MOSFET Switch
- Up to 90% Efficiency
- Fixed 1.1MHz Frequency
- Preconditioning for Fully Depleted Batteries
- Charging Operation Indicator
- Input Supply and Battery Fault Indicator
- Thermal Shutdown
- Cycle-by-Cycle Over Current Protection
- Battery Temperature Monitor and Protection
- もっと見る Show less
EV2610ER-00A Evaluation Kit 2A, 24V Input, 1.1 MHz Switching Li-Ion Battery Charger EV Board
The EV2610ER-00A is an evaluation board for the MP2610, a switching, high?performance 1~2 cell Li-Ion battery charger with built in internal power MOSFET.
MP2610 achieves up to 2A charge current over a wide input supply range. The charge current can be programmed by sensing the current through an accurate sense resistor.
MP2610 regulates the battery voltage and charge current using two control loops to realize high accuracy CC charge and CV charge.
Fault condition protection includes time out control, battery full terminated control, thermal protection, battery temperature monitoring and protection. The board also indicates AC adapter power good and charge status indications to the system.