MP2603

アクティブ

Single-Cell 150mA Linear Li-Ion Battery Charger



評価ボード詳細をご覧ください。
エンジニアにコンタクト、もしくは見積もり入手

製品説明

The MP2603 is a low cost single cell Li-ion battery charger IC suitable for low charge current applications. It features constant current (CC) and constant voltage (CV) charging modes with programmable charge current (50mA-150mA), trickle charge and charge status indication. The MP2603 is enabled with an input supply voltage greater than 3.5V. The charger IC is disabled when unplugged from the AC adaptor. To minimize the charger?s total solution cost, the MP2603 does not need an external reverse blocking diode, a precision current-sense resistor or a compensation capacitor at the output. MP2603 is available in a 5-pin TSOT23 package.

製品の特長

  • VIN Surge Up to 25V
  • 0.75% VBATT Accuracy
  • Low Battery Reverse Current, (< 1uA)
  • Programmable Charge Current
  • Over Temperature Protection
  • Over Current Protection
  • Charge Status Indication
  • Over Charge Protection
  • No External Sense Resistor Required
  • No External Reverse Blocking Diode Required
  • No Output Capacitor Required for Stability

パラメータ

  • Icharge (max) (A)0.15
  • Vbatt (max) (V)4.2
  • Operating Vin (max) (V)5.25
  • Absolute Vin (max) (V)25
  • Vbatt (min) (V)4.2
  • NTC MonitoringNo
  • Operating Vin (min) (V)2.8
  • Series Cells1
  • GradeCatalog
  • Special FeaturesThermal Regulation, USB Compatible
  • TopologyLinear
  • Battery TypeLi-Ion, Li-Polymer
  • Control InterfaceStandalone
  • TimerNo
  • Power PathNo
  • USB ModeNo
  • PackageTSOT23-5

Single Cell 150mA Linear Li-Ion Battery Charger Evaluation Board

The EV2603EJ-00B is an evaluation board for the MP2603, a low cost single cell Li-ion battery charger IC suitable for low charge current applications.

The MP2603 features constant current (CC) and constant voltage (CV) charging modes with programmable charge current (50mA–150mA), trickle charge and charge status indication.

The MP2603 is enabled with an input supply voltage greater than 3.5V. The charger IC is disabled when unplugged from the AC adaptor. To minimize the charger’s total solution cost, the MP2603 does not need an external reverse blocking diode, a precision current-sense resistor or a compensation capacitor at the output. The MP2603 is available in a 5-pin TSOT23 package.

¥2,716.25 + tax


品質方針、証明書および信頼性レポート
すべてのMPS部品は鉛フリー、ハロゲンフリーで、RoHS指令に準拠しています。詳細については、環境セクションを参照してください。