3+ Series Cell Chargers

Leading Power Density
36V 3A integrated FET charging solution in a 3mm*3mm QFN package
Industrial Friendly
Support for up to 40V Vin and 6 series cells up to 27V packs
USB-C & PD Compatible
Fast charging solutions optimized for higher voltage and current

Three or more series cells are typically used for battery packs in applications with much higher discharge power requirements such as notebook computers, large wireless speakers, robot vacuums, power tools, industrial, and battery backup systems. MPS offers several different charger topologies for 3s applications depending on the input power source type and max charging current needed. For non-USB applications such as industrial equipment, it is most cost-effective to use a charger IC with buck topology, since the adapter’s output voltage can always be selected to be higher than the maximum battery voltage. For these applications, MPS offers fully-integrated buck charger ICs capable of up to 36V operating voltage and charging up to 6 series cells. For higher power USB-C Power Delivery (USB PD) applications, a charger with buck-boost topology is needed since legacy 5V USB adapters must be supported in addition to up to 20V USB PD. USB PD applications can take advantage of MPS’s industry-leading power density with our integrated FET buck-boost chargers capable of delivering up to 6A of charge current.

参照表示列
ステータス
Series Cells
Vbatt (min) (V)
Vbatt (max) (V)
Icharge (max) (A)
Operating Vin (min) (V)
Operating Vin (max) (V)
Absolute Vin (max) (V)
Iin (max) (A)
Battery Type
Control Interface
Topology
Special Features
Package
MPL
Series Cells
Vbatt (min) (V)
Vbatt (max) (V)
Icharge (max) (A)
Operating Vin (min) (V)
Operating Vin (max) (V)
Absolute Vin (max) (V)
Iin (max) (A)
Battery Type
Control Interface
Topology
Special Features
Package
200
100
50
30
20
1
Li-Ion
Li-FePO4
Li-Polymer
Standalone
Buck
Batt NTC Monitor
Input Bypass Power Path
Input Current Regulation
Input Voltage Regulation
JEITA Batt NTC Monitor
One-Time Programmable Memory
QFN-16 (4x4)
QFN-19 (3x3)
QFN-28 (4x5)
Has MPL
MP2759
プレリリース

36V 3A Switching Charger with Integrated MOSFETs and Power Path Management for 1-6 Cell Batteries

1, 2, 3, 4, 5, 6 3.6 26.4 3 3.9 36 40 3 Li-Ion, Li-FePO4, Li-Polymer Standalone Buck Input Bypass Power Path, Input Current Regulation, Input Voltage Regulation, JEITA Batt NTC Monitor, One-Time Programmable Memory QFN-19 (3x3) 0
MP2659
新規

36V, Standalone Switching Charger with Integrated MOSFETs for 3-Cell to 6-Cell Series Battery Pack

3, 4, 5, 6 10.8 26.1 3 3.9 36 40 3 Li-Ion, Li-FePO4, Li-Polymer Standalone Buck Batt NTC Monitor, Input Current Regulation, Input Voltage Regulation, One-Time Programmable Memory QFN-19 (3x3) 0
MP26123
アクティブ

600kHz Switching Li-Ion Battery Charger

2, 3 8.4 12.6 2 3.4 24 26 Li-Ion, Li-Polymer Standalone Buck Batt NTC Monitor QFN-16 (4x4) 0
MP2619
アクティブ

600kHz Switching Li-Ion Charger with System Power Path Management

2, 3 8.4 12.6 2 3.4 24 26 2 Li-Ion, Li-Polymer Standalone Buck Batt NTC Monitor, Input Bypass Power Path, Input Current Regulation QFN-28 (4x5) 0
MP26124
アクティブ
24V Input, 2A, 600kHz, 4S Cell Switching Li-Ion Battery Charger
4 16.8 16.8 2 3.45 24 28 Li-Ion Standalone Buck Batt NTC Monitor QFN-16 (4x4) 0
MP2612
新設計には使用不可

600kHz Switching Li-Ion Battery Charger

2, 3 8.4 12.6 2 3.4 24 26 Li-Ion, Li-Polymer Standalone Buck QFN-16 (4x4) 0
No more part left for display.