オーバービュー
Evaluation Tools
設計リソース
品質

MP2695

I²C-Controlled, Single-Cell Switching Charger with JEITA Profile

新規

Datasheet

概要

The MP2695 is a highly integrated, flexible, switch-mode battery charging management device designed for a single-cell Li-ion and Li-polymer battery used in a wide range of portable applications.

The MP2695 integrates three battery-charging phases: pre-charge, constant-current, and constant-voltage charge. This device also manages the input power source by input current limit regulation and minimum input voltage regulation.

Using an I²C interface, the host can flexibly program the charge parameters. The device operating status can also be read in the registers.

Safety features include input over-voltage protection, battery under-voltage protection, thermal shutdown, and JEITA battery temperature monitoring.

The MP2695 is available in a 21-pin QFN (3mmx3mm) package.

Advantages Include:

Small 3mm x 3mm solution size
High efficiency: >94% efficiency at 3A charge current
Advanced safety features including programmable JEITA NTC Monitoring, Charging Timer, Input/output OVP, and Thermal Shutdown
I2C programmable parameters including input current and voltage regulation, charge current, battery voltage, and NTC thresholds

機能と利点

4.0V to 11V Operating Voltage Range and 16V Absolute Max Input Voltage
Programmable Input-Current Limit from 100mA to 3.0A
Programmable Charge Current Up to 3.6A
Programmable 3.6V-4.45V Charge Voltage with 0.5% Accuracy
Programmable Input Voltage Loop for Adapter Max Power Tracking
Custom JEITA Battery Temperature Monitoring with Programmable Thresholds for Different NTC Types
Robust Safety Features Include Input OVP, Battery UV Protection, Thermal Shutdown, and Battery Temperature Monitoring

Evaluation Tools

EVKT-MP2695 Evaluation Kit I²C-Controlled, Single-Cell Switching Charger with JEITA Profile

The EVKT-MP2695 is an evaluation kit for the MP2695. This kit is designed for the MP2695, which is a highly integrated, single-cell Li-ion/Li-polymer battery charger. Its layout accommodates most commonly used capacitors. The default function of this board is preset for charger mode, and the charge full voltage is preset to 4.200V for a single-cell Li-ion battery.

￥10,865.00
+ tax

EV2695-Q-01A

I²C-Controlled, Single-Cell Switching Charger Evaluation Board

MP2695 I2C Evaluation GUI

The MP2695 is highly customizable. Users can configure the MP2695 via the downloadable I2C GUI.

EVKT-USBI2C-02

通信インターフェースデバイスUSB to I2C / PMBusは、製品評価キットに含まれていますが、個別に購入することもできます。

設計リソース

シンボル、フットプリント＆3Dモデル

30種以上のフォーマット Show more