- Evaluation Tools
- Design Resources
- Technical Forum
Low Noise, 1A Linear Regulator
You have a basic account.A myMPS+ account is needed.Upgrade to myMPS+
Session Titefor popup
The MP20045 is a low-dropout linear regulator supplies up to 1A current with 140mV dropout voltage. The output voltage is set externally which ranges from 1.5V to 5V by operating from +2.5V to +5.5V input or can be preset internally from 1.5V to 5V.
An internal PMOS pass element is used to allow a low 110μA ground current, making the MP20045 suitable for battery-power devices. Other features include low-power shutdown, short-circuit and thermal protection. The MP20045 is available in 8-pin QFN (3mm x 3mm) and SOIC8E packages.
- Show more Show less
Log in to your account
Create New Account
Features & Benefits
- Up to 1A Output Current
- Low 140mV Dropout at 1A
- Low 110μA Ground Current
- Fixed Output Versions Ranging from 1.5V to 5V and Adjustable Versions
- Open Drain Power-Good Status Output
- 13μVRMS Low Noise Output
- 56dB PSRR at 1kHz
- Current Limiting and Thermal Protection
- 3mm×3mm QFN8 and SOIC8E Packages
EV20045DN-00A Evaluation Kit Low Noise, 1A, Linear Regulator EV Board
The EV20045DN-00A evaluation board demonstrates the performance of MP20045, a low noise and low dropout linear regulator. It operates from a 2.5V to 5.5V input voltage and the output voltage can be set externally which ranges from 1.5V to 5V.
The EV20045DN-00A can supply up to 1A of load current, and features current limiting, over temperature protection and power-good status.
An internal PMOS pass element is used to allow a low 110uA ground current, marking the MP20045 suitable for battery-power devices.