MP3388S
Active Part Numbers:
MP3388SGR-P MP3388SGR-Z
Meaning of P & Z 
Evaluation Tools
EV3388DR-01A Evaluation Kit 8 Strings, White LED Driver Evaluation Board
The EV3388DR-01A is an evaluation board for the MP3388DR, a step-up converter designed for large liquid-crystal displays that employ an array of LEDs as the light source. It can drive up to 8 strings in parallel and 10 LEDs per string.
The MP3388 uses internal switch current mode, fixed frequency architecture and includes current ballast in each string terminal, which achieves ±3% current regulation accuracy between strings. Low feedback voltage at each LED string help reduce power loss and improve efficiency.
The MP3388 has multiple features to protect the converter from fault conditions, including under-voltage lockout, current limiting, over voltage, short LED, open LED and thermal shut-down protection.
The MP3388 is available in small QFN24 (4mmx 4mm), TSSOP28 and SOIC28 package.
MP3388S Resources
-
IP NETWORK CAMERASIP network cameras are quickly gaining traction over traditional analog security camera networks. Most IP network cameras serve the same function as analog security cameras but do not require local storage capacity and are connected to a users LAN network. Because of this, they are a popular part of smart home systems and security. Ever-growing user expectations and increasing concern about both d...
-
NOTEBOOKS (IMVP8)Notebook computers and laptops are a crucial device for many consumers and businesses, and therefore need to be able to offer reliable performance and a streamlines user experience in a slim package. As new technologies and applications continue to enter the market, notebooks and laptops must balance increasing processing performance and efficiency demands with customer expectations for small, lig...
-
INDUSTRIAL PCSIndustrial PCs must offer the same performance and capabilities as standard consumer PCs, while also being able to withstand harsh conditions such as vibrations, dust, exposure to high temperature ranges and other materials. These industrial computers are also designed to have a longer life cycle and to lessen the risk of discontinued software or hardware, or legacy features not being supported. T...
-
HVACHeating, ventilation, and air conditioning (HVAC) units for both industrial and residential applications must offer customers the key features of reliability, energy efficiency, and convenience. The best HVAC systems provide temperature adjustments and air circulation without introducing a lot of noise or raising power bills. New generations of HVAC units are integrating smart-home ready features ...
-
MPQ3326: 16-CHANNEL, 50MA PER CHANNEL, AUTOMOTIVE-GRADE LED DRIVERThe MPQ3326-AEC1 WLED driver supports up to 16V input voltage, and applies 16 internal current sources in each LED string terminal. The LED current of each channel is set by an external current-setting resistor and the device is I2C configurable, as well as being integrated into a compact QFN-24 (4mmx4mm) package. Separate Pulse-Width Modulation (PWM) Dimming and Analog Dimming per Channel Dee...
-
MP1528: UNBOXING AND GETTING STARTEDOur engineers walk you through unboxing and getting started with the evaluation kit for the MP1528, a 36V precision LED driver. The EV1528DQ-00A evaluation board provides the ability to test and configure the driver for your application.
-
POWER OVER ETHERNET (POE) POWER SUPPLY PROCESS ACROSS IEEE 802.3AF/AT/BT PROTOCOLAlthough there are various power supply types, this article will focus on Power over Ethernet (PoE) power supplies. In particular, PoE power supplies where the power sourcing equipment (PSE) supplies power to the powered device (PD) terminal equipment through the network cable. Figure 1 shows common PoE power supply equipment, including the PoE switch as well as power-receiving equipment (e.g. wir...
-
MPS POWER MANAGEMENT SOLUTIONS FOR POWER OVER ETHERNET (POE) SWITCHESModern devices are increasingly powered by Power over Ethernet (PoE), such as IP phones, wireless APs, and IP cameras. Customer premise equipment (CPE) and small base stations in the 5G era also require PoE power. Figure 1 shows common applications powered by PoE. This article discusses MPS’s comprehensive suite of power management solutions for a wide range of switches, including PSE, boo...
-
UNDERSTANDING POWER OVER ETHERNET AND POE CONTROLLERS AND CONVERTERSThis introduction to power over Ethernet (PoE) covers the basics of PoE standards, how PoE structure functions, and how PoE works between the PSE and PD. PoE enables an Ethernet cable to transmit DC power while also transmitting data in parallel to IP terminal devices. PoE power delivery includes two equipment types: Power-sourcing equipment (PSE) or a power provider, and powered devices (PDs) or ...
-
UNDERSTANDING ANGLE POSITION SENSOR RESOLUTION AND BANDWIDTH IN SERVO CONTROL LOOPSThis presentation details the advantages of magnetic angle sensing compared to optical sensing, the differences between Hall-effect and TMR-based solutions, and how to assess resolution accuracy and bandwidth. Learn the impact of error sources, and the importance of calculating real resolution in an application. Next-generation TMR sensor solutions such as the MA600 offer new levels of sensitivity...
-
FULLY INTEGRATED POE PD INTERFACE: MP8030The MP8030 is a fully integrated, 71W PoE PD interface with a high-efficiency flyback/forward controller, and is compatible with 802.3af/at/bt specifications. Power Over Ethernet, or PoE, devices can transmit both network and power signals with a single cable. By using an N-channel MOSFET in place of a diode and integrating a MOSFET at Gate 2, the MP8030 significantly reduces voltage drop, reduces...
-
PLANNING FOR SUDDEN POWER FAILURES WITH THE MP5515Power failures tend to cause a domino effect of disruptions, resulting in system failures and data loss, as well as damage to servers and equipment. This article describes how to use the MP5515 to protect solid-state drives (SSDs) against sudden power failure. There are three main issues if an SSD experiences a power failure: The MP5515 is an input power conditioning PMIC that provides a compact...
-
DESIGNING A POWER OVER ETHERNET (POE) SOLUTIONPower over Ethernet (PoE) is a power supply scheme that uses a network cable to transmit power. This scheme includes power sourcing equipment (PSE), a powered device (PD), and a network cable. With the popularity of IP device applications, PoE has become widespread among users due to its low installation costs, scalability, ease of management, and global compatibility. After over a decade since t...
-
MA102/MA302: 12-BIT, COMPACT ANGLE SENSORS FOR BLDC MOTOR COMMUTATIONThe MagAlpha MA102 and MA302 series replaces discrete Hall switches in any block commutated brushless DC (BLDC) motor, including power tools, fans, white goods, automotive applications, and more. These sensors are available in a small QFN (3mmx3mm) package, providing flexibility for highly compact designs. Changing to a single MA102 or MA302 reduces board space by up to 70% with no need for a sepa...
-
LOW POWER ANGLE SENSOR USE CASE: FOLDABLE TABLETSIn this use case, well examine the application of MagAlpha Angle Sensors in foldable tablets. These angle sensors allow accurate angle detection on the side of the hinge versus the traditional magnet solution on the bezel. As the electronics industry for smartphones and tablets moves toward bezel-less and foldable display designs, new challenges have arisen that require engineers to address sp...
-
ANGLE SENSOR USE CASE: FOLDABLE PHONESIn this use case, we’ll examine the application of MagAlpha Angle Sensors in foldable phones.As the electronics industry for smartphones and tablets moves towards bezel-less and foldable display designs, new challenges have arisen that require engineers to address space constraints. Flexible displays in foldable phones benefit from angle sensors with a combination of low-power, long battery life, ...
-
ARTIX ULTRASCALE+ AU20P/25P MINIMUM RAILS – LOWEST COST -
ARTIX ULTRASCALE+ AU10P/15P MINIMUM RAILS – LOWEST COST -
POE STANDARDS INTRODUCTION AND KEY DESIGN CONSIDERATIONS WEBINARLearn about PoE standards and how to apply when making a new design.
-
HIGH-PERFORMANCE ANGLE, POSITION, AND CURRENT SENSINGOverview of MPS position sensors and current sensors.
-
MP2731 USB PD REFERENCE DESIGN: 4.5A, NVDC SINGLE-CELL CHARGER WITH OTGThe MP2731 USB power delivery (PD) reference design provides a complete solution for USB PD applications that comply with USB PD3.0 specifications. The major components of this reference design include the MP2731 — a 4.5A, narrow voltage DC (NVDC) single-cell Li-ion battery charger — and a CCG3PA (USB PD controller). The reference design offers a bidirectional DRP Type-C port. When a ...
-
SURFACE-MOUNTED INDUCTORS OPTIMIZED FOR MPS ICSThe new surface-mounted power inductors from Monolithic Power Systems are designed for applications ranging from power supplies to power converters. The molded and semi-shielded series inductors include inductance ranges from 0.33µH to 22µH, and saturation current ranges from 0.8A to 64A. This series includes molded, magnetic-shielded power inductors that offer soft saturation due t...
-
SPARTAN 7 PMIC SOLUTION WITH POWER SEQUENCING FOR HIGH POWER APPLICATIONS (4-12VIN)This reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MP5470 PMIC has 4x bucks, Vin range 6.5V to 16V, I2C support and available in a 3x4mm QFN package. ...
-
SPARTAN 7 PMIC SOLUTION WITH POWER SEQUENCING FOR HIGH POWER APPLICATIONS (5VIN)This reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements MP5416 PMIC with 4x bucks, 5x LDOs Vin 2.8V to 5.5V I2C support QFN-28 (4mmx4mm) Cost effective Small Foot...
-
OFFLINE 600W BATTERY CHARGERThe EVHR1211-Y-00B is an evaluation board for lithium-ion batteries, which are typically used in e-mobility and uninterruptible power supply (UPS) applications. The EVB can also be used as a general power supply unit. The device regulates the output voltage to 58.8V if there is not a battery present. This solution is based on a PFC + LLC combo controller from a single integrated circuit (the HR121...
Learn about our Evaluation Kit
Log in to your account
Create New Account