MP2674
You have a basic account.A myMPS+ account is needed.
Upgrade to myMPS+Session textval
Session Titefor popup
Description
The MP2674 is a high performance single cell Li-Ion/Li-Polymer battery charger protection circuit. By integrating high voltage input protection into the IC, the MP2674 can tolerate an input surge up to +30V. The device features input over voltage protection (OVP), battery over voltage protection (BOVP) and over charge current protection (OCP). The device also provides fault indications to the system when any of the protection events happens. For guaranteed safe operation, the MP2674 monitors its own internal temperature and turns off the MOSFET bridging VIN and OUT when the die temperature exceeds 150oC. The MP2674 is available in an 8-pin 2x2mm QFN package.
-
Show more
Show less
Features & Benefits
- Input Surge up to 30V
- Input Over voltage protection in 1?
- Proprietary Battery Over-Voltage Protection
- Programmable Charge Current Protection Limit Value
- Temperature Monitoring and Protection
- Fault Indication
- 2mmx2mm QFN Package

MP2674 Resources
-
APPLICATION
ULTRASOUND MACHINES (PORTABLE)APPLICATIONMedical ultrasound imaging uses high-frequency sound waves to view internal structures inside the body, such as internal organs, blood vessels, and developing fetuses in the womb. Ultrasound technology is in high demand as it is a less invasive, less expensive diagnostic method than imaging techniques such as MRIs or CT scans. Advances in integrated technology have allowed the introduction of port...
-
APPLICATION
PORTABLE POSAPPLICATIONPortable points of service (POS) are tasked with delivering fast, secure payment transactions amid changing payment methods and growing customer expectations. They must offer high reliability, long battery life, ease-of-use, and quick processing speeds to accelerate checkout times. As retail and service spaces increasingly compete with online goods and service providers, efficiency and convenience...
-
REFERENCE DESIGN
ARTIX ULTRASCALE+ AU10P/15P MINIMUM RAILS – HIGHEST POWER REFERENCE DESIGNREFERENCE DESIGN -
REFERENCE DESIGN
ARTIX ULTRASCALE+ AU10P/15P MINIMUM RAILS – SMALLEST SIZEREFERENCE DESIGN -
VIDEO
MPF42790 BATTERY MANAGEMENT FUEL GAUGE SOLUTIONVIDEOProviding battery pack or cell state-of-charge (SoC) information is key for good performance and customer satisfaction. However, the fact it cannot be directly measured presents challenges for engineers. The MPF42790 fuel gauge IC combines accurate readings and application-specific settings, including auto-learning capabilities, to provide accurate estimations of a batterys most important paramete...
-
ARTICLE
HOW TO ACHIEVE FAST CHARGING WITH USB PD IN PORTABLE DEVICESARTICLEToday’s consumers want to conveniently and quickly charge their portable devices anywhere, whether they are in a business center or shopping mall, or waiting for a flight or train. However, there are many different types of charging adapters and connectors, which can make determining which charger or chargers to have on hand confusing for the end user. If the consumer has to carry multiple d...
-
ARTICLE
SURFACE-MOUNTED INDUCTORS OPTIMIZED FOR MPS ICSARTICLEThe new surface-mounted power inductors from Monolithic Power Systems are designed for applications ranging from power supplies to power converters. The molded and semi-shielded series inductors include inductance ranges from 0.33µH to 22µH, and saturation current ranges from 0.8A to 64A. This series includes molded, magnetic-shielded power inductors that offer soft saturation due t...
-
REFERENCE DESIGN
ZYNQ7000 REFERENCE DESIGN USING PMIC MODULEREFERENCE DESIGNThe MPS Reference design for the AMD Xilinx Zynq-7000 SoC is centered around MPM54304 Quad PMIC module with 4 outputs (3A/3A/2A/2A) and two LDO regulators to provide all power rails to Zynq SoC. MPM54304 outputs can be paralleled for design flexibility and it includes built-in power sequencing. This design can operate from a 4V-16V input supply.
-
REFERENCE DESIGN
45W USB-C POWER ADAPTER WITH CYPRESS CCG3PAREFERENCE DESIGNThis 45W Notebook Power Adapter Board is a receptacle based Type-C power adapter. The major components in this design are Cypress’s EZ-PD CCG3PA (CYPD3174-16SXQ) controller and Monolithic Power System's Fixed Frequency Flyback controller (HF0500) and Synchronous Rectification Controller (MP6907) The MPS components on these reference designs are carefully selected to meet price and perfo...
-
REFERENCE DESIGN
WIFIREFERENCE DESIGNMPS works closely with Qualcomm to create power solutions for all their WiFi products supporting 802.11ax including WiFi6 standards with 2.4GHz/5GHz/6GHz bands The MPS components on these reference designs are carefully selected to meet price and performance objectives of these designs. Please contact your regional MPS contact or use the displayed link below for assistance
-
ARTICLE
STEPPER MOTORS BASICS: TYPES, USES, AND WORKING PRINCIPLESARTICLEIn this article, we will cover the basics of stepper motors. You will learn about the working principles, construction, control methods, uses, and types of stepper motors, as well as its advantages and disadvantages. A stepper motor is an electric motor whose main feature is that its shaft rotates by performing steps, that is, by moving by a fixed amount of degrees. This feature is obtained tha...
-
REFERENCE DESIGN
ZYNQ -7000 HIGH EFFICIENCY POWER REFERENCE DESIGNREFERENCE DESIGN -
ARTICLE
HIGH-VOLTAGE ANALOG SWITCHES FOR MEDICAL ULTRASOUNDARTICLEMedical ultrasound imaging is a non-invasive method of viewing internal organs and structures of the human body using high-frequency acoustic waves. By sending an acoustic wave into the human body and listening to the acoustic echoes, an ultrasound image can be created. Given the acoustic properties of the human body, the optimum frequency range for general medical ultrasound imaging is 1.0MHz to ...
-
REFERENCE DESIGN
REFERENCE-DESIGN-PARTNERS XILINX-REFERENCE-DESIGN XILINX-ZYNQ-7000-INDUSTRIAL-ETHERNET-BOARDREFERENCE DESIGNThe MPS Industrial Ethernet Reference design for the AMD Xilinx Zynq-7000 SoC combines a small footprint with good efficiency and tight regulation. Three MPM3630 3 amp buck modules combine with an MPM3610 1 amp buck module and two LDO regulators to provide power rails to the Zynq SoC. The output rails are from 0.75V to 3.3V, from a 12V input supply.
Log in to your account
Create New Account