- Evaluation Tools
- Design Resources
You have a basic account.A myMPS+ account is needed.Upgrade to myMPS+
Session Titefor popup
The MP2312 is a fully integrated high frequency synchronous rectified step-down switch mode converter. It offers very compact solutions to achieve 2.1A continuous output current over a wide input supply range with excellent load and line regulation. The MP2312 operates at high efficiency over a wide output current load range. Constant-On-Time (COT) control mode provides fast transient response and eases loop stabilization. Under voltage lockout is internally set as 4.6 V, An open drain power good signal indicates the output is within its nominal voltage range. Full protection features include OCP and thermal shut down. The converter requires minimum number of external components and is available in QFN16 (3x3mm) package.
- Show more Show less
Log in to your account
Create New Account
Features & Benefits
- Wide 5V to 24V Operating Input Range
- 2.1A Continuous Output Current
- Low RDS(ON) Internal Power MOSFETs
- Proprietary Switching Loss Reduction Technique
- 1% Reference Voltage In Room Temperature
- 7ms Internal Soft Start
- Output Discharge
- 500kHz Switching Frequency
- Hiccup OCP Protection and Thermal Shutdown
- Auto Retry OVP Protection
- Output Adjustable from 0.604V to 5.5V
EV2312-Q-00A Evaluation Kit 24V, High-Current, Synchronous Step-Down Converter Evaluation Board
The EV2312-Q-00A is an evaluation board for the MP2312, a high-efficiency, monolithic, synchronous step-down converter. The evaluation board can deliver 2.1A continuous load current from a 6V to 24V input, with excellent load and line regulation. Constant-on-time (COT) control mode provides fast transient response and eases loop stabilization.
The evaluation board can be turned on or shut down via a remote on/off input that is referenced to ground. This input is compatible with popular logic devices.