- Evaluation Tools
- Design Resources
- Technical Forum
Single Cell 4.5A Fast Charger with NVDC Power Path, OTG, and Integrated ADC
You have a basic account.A myMPS+ account is needed.Upgrade to myMPS+
Session Titefor popup
The MP2731 is a 4.5A highly-integrated switching-mode battery charge management device for single-cell Li-ion or Li-polymer battery. This device with NVDC system power path management is suitable for a variety of applications such as smartphone, tablets, wireless cameras and other portable devices. Its low impedance power path optimizes efficiency, reduces battery charging time and extends battery life. The I2C serial interface with charging and system settings allow the device to be flexibly controlled.
The MP2731 supports a wide range of input sources, including standardUSBhost port and higher power wall adapter with fast charge capability. The MP2731 provides USB input type detection via DP/DM pins.
The MP2731 supportsUSBOn-The-Go operation by supplying 5V on input bus with output current limit up to 3.0A.
The MP2731 initiates and completes a charging cycle without software control. It automatically detects battery voltage and charges battery in different stages. The charger automatically terminates when battery charged fully is detected. When the fully battery drops below recharge threshold, the charger automatically starts another charging cycle.
The charger provides various safety features for battery charging and system operations, including charging safety timer, battery temperature monitoring and overvoltage/over current protections. When any fault occurs, the charger asserts an INT to host. The device provides BATFET disable control to enter ship mode and system reset function via DISC pin.
The MP2731 is available in a QFN-26 (3.5mmx3.5mm) package.
- Show more Show less
Log in to your account
Create New Account
Features & Benefits
- 3.7V to 16V Operating Input Voltage Range
- Up to 22V Sustainable Voltage
- High Efficiency 4.5A 1.5MHz Buck ChargerUp to 92% Charge Efficiency at 3A Charge Current
- Programmable D+/D- for Flexible Fast Charge Protocol Support
- USB On-the-Go (OTG) with Adjustable Output from 4.8V to 5.5VUp to 3.0A Output
- Up to 93% Efficiency with 1.5A OTG Load
- Narrow Voltage DC (NVDC) Power Path ManagementInstant on works with no battery or deeply discharged battery
- Ideal diode operation in battery supplement mode
- High Battery Discharge Efficiency with 14mΩ BATFET up to 9A
- I2C Port for Flexible System Parameter Setting and Status Reporting
- Fully-integrated power MOSFETs, Current Sensing and Loop Compensation
- Dedicated DISC pin to Control Ship Mode and System Reset
- 13µA Low Battery Leakage Current in Shipping Mode
- Integrated ADC for Monitoring Input Voltage, Input Current, Battery Voltage, Charge Current, System Voltage and Battery Temperature
- Charging Status Indicator
- Programmable JEITA for Battery Temperature Protection for Charge Mode
- Battery Charging Safety Timer
- Thermal Regulation and Thermal Shutdown
- Watchdog Monitoring I2C Operation
- Input/System Overvoltage Protection
EV2731-QC-00A Evaluation Kit Wide-Input, 4.5A, I2C-Controlled SW Charger w/ NVDC Power Path and USB OTG Eval Board
The EV2731-QC-00A is an evaluation board for designed to demonstrate the capabilities of the MP2731. The MP2731 is a wide-input, 4.5A, highly integrated switch-mode battery charger IC for single-cell Li-ion or Li-polymer batteries. This device supports NVDC architecture with power path management suitable for portable applications including tablets, mobile internet devices, and smartphones.
Its low-impedance power path optimizes efficiency, reduces battery charging time, and extends battery life. The I2C serial interface with charging and system settings allows the device to be flexibly controlled.
The EV2731-QC-00A supports up to 16V input sources, including standard USB host ports and high-voltage wall adapters with fast-charge capability. The EV2731-QC-00A supports USB On-the-Go (OTG) operation by supplying 5V with 3.0A.
The EVKT-MP2731 is an evaluation kit for the MP2731, a standalone switching charger with integrated USB detection and USB-OTG functionality.
Communication Interface Device USB to I2C/PMBus, included with product evaluation kit or can be purchased separately.