- Up to 16V Sustainable Input Voltage
- 4.5V-to-6V Operating Input Voltage Range
- Power Management function, Integrated Input-Current Limit, Input Voltage Regulation
- Up to 2.5A Programmable Charge Current
- Trickle-Charge Function
- Selectable 4.2V/ 4.35V Charge Voltage with 0.5% Accuracy
- Negative Temperature Coefficient Pin for Battery Temperature Monitoring
- Programmable Timer Back-Up Protection
- Thermal Regulation and Thermal Shutdown
- Internal Battery Reverse Leakage Blocking
- Integrated Over Voltage Protection and Over Current Protection for Pass-Through Path
- Reverse Boost Operation Mode for System Power
- Up to 2.4A Programmable Output Current Limit for Boost Mode
- Integrated Short Circuit Protection and Output Over Voltage Protection for Boost Mode
- Operating Vin (min) (V)4.5
- Operating Vin (max) (V)6
- Absolute Vin (max) (V)20
- Vbatt (max) (V)4.35
- Vbatt (min) (V)4.2
- Battery TypeLi-Ion, Li-Polymer
- Iotg (A)2.4
- Iin (max) (A)2.7
- Icharge (max) (A)2.5
- Votg (max) (V)5
- fsw (kHz)600
- Control InterfaceStandalone
- Special FeaturesBatt NTC Monitor, Cell OCP, Input Bypass Power Path, Power Bank Output Mode, Thermal Regulation, USB OTG (Boost Mode), VIN Regulation
- PackageQFN-24 (4x4)
- NTC MonitoringYes
- EN ControlNo
- Charge Status Yes
Full-Power-Management IC For Single-Cell Battery System
The EV2637-R-00A is the evaluation board designed to demonstrate the capabilities of MPS’ MP2637, a highly-integrated, flexible switch-mode battery charge management and system power path management device for a single-cell Li-ion and Li-Polymer battery used in a wide range of portable applications.
EV2637 uses two operating modes—charge mode and boost mode—to allow management of system and battery power based on the state of the input.
When input power is present, the board charges a single-cell battery with a programmable charge current of up to 2.5A.
In the absence of an input source, the board switches to boost mode through the MODE pin to power the SYS pins from the battery with a current of up to 2.1A.
The evaluation board provides full-operating-status indicators to distinguish charge mode from boost mode.
To guarantee safe operation, the EV2637 has input-over-voltage protection, battery over-voltage protection, thermal shutdown, battery-temperature monitoring, and a programmable timer to prevent prolonged charging of a dead battery.
$25.00 + tax