MP2632

Active
All-in-One, 3A Battery Charger w/ 3A Boost Current


Learn about our Evaluation Kit
Talk to an Engineer or get a Quote

Product Description

The MP2632 is a highly integrated, flexible, switch-mode battery charger with system power-path management and is designed for single-cell Li-ion or Li-polymer battery use in a wide range of applications. The IC can operate in both charge mode and boost mode to allow for full system and battery power management. The IC has an integrated IN-to-SYS pass-through path to pass the input voltage to the system. The pass-through path has built-in over-voltage and over-current protection and has a higher priority over the charging path. When the input power is present, the device operates in charge mode. The MP2632 detects the battery voltage automatically and charges the battery in three phases: trickle current, constant current and constant voltage. Other features include charge termination and auto-recharge. The MP2632 also integrates both input current limit and input voltage regulation to manage input power and meet the priority of the system power demand. In the absence of an input source, the IC switches to boost mode through PB to power SYS from the battery. In boost mode, OLIM programs the output current limit, and the IC turns off at light load automatically. The IC also uses output short-circuit protection to disconnect the battery from the load completely in the event of a short-circuit fault. The MP2632 resumes normal operation once the short-circuit fault is removed. The 4-LED driver is integrated for voltage-based fuel gauge indication. Together with torch-light cont

Product Features

  • Up to 14V Sustainable Input Voltage
  • 4.65V to 6V Operating Input Voltage Range
  • Power Management Function, Integrated Input Current Limit, Input Voltage Regulation
  • Up to 3A Programmable Charge Current
  • Trickle-Charge Function
  • Selectable 4.2V/4.35V/4.45V Charge Voltage with 0.5% Accuracy
  • 4-LED Driver for Battery Fuel Gauge Indication
  • Automatic Turn-Off at Light Load
  • Input Source Detection
  • Output Source Signaling
  • Torch-Light Control
  • Negative Temperature Coefficient Pin for Battery Temperature Monitoring
  • Programmable Timer Back-Up Protection
  • Thermal Regulation and Thermal Shutdown
  • Internal Battery Reverse Leakage Blocking
  • Integrated Over-Voltage Protection (OVP) and Over-Current Protection (OCP) for Pass-Through Path
  • Reverse Boost Operation Mode for System Power
  • Up to 3.0A Programmable Output Current Limit for Boost Mode
  • Integrated Short-Circuit Protection (SCP) and Output Over-Voltage Protection for Boost Mode

Parametrics

  • Operating Vin (min) (V)3.6
  • Operating Vin (max) (V)5.8
  • Absolute Vin (max) (V)14
  • Cells1
  • GradeCatalog
  • NVDCNo
  • Vbatt (max) (V)4.45
  • Vbatt (min) (V)4.2
  • Battery TypeLi-Ion, Li-Polymer
  • Iotg (A)3
  • Iin (max) (A)3
  • Icharge (max) (A)3
  • Votg (max) (V)5
  • TopologyBuck
  • fsw (kHz)600
  • Control InterfaceStandalone
  • PackageQFN-26 (4x4)
  • TimerYes
  • NTC MonitoringYes
  • EN ControlNo
  • Charge Status Yes

Evaluation Board for All-in-One 3A Battery Charge and 3A Boost Discharge

The EV2632-R-01A is the evaluation board designed to demonstrate the capabilities of MPS’s MP2632, a highly integrated, flexible, switch mode battery charge management for a single-cell Li-ion and Li-Polymer battery used in a wide range of applications.

The EV2632 uses two operating modes, charge mode and boost mode, to allow management of system and battery power based on the state of the input. When input power is present, the board charges a single-cell battery with a programmable charge current of up to 3A. In the absence of an input source, the board switches to boost mode through the PB pin to power the SYS pins from the battery with a current of up to 3A.

The evaluation board provides 4 LEDs to achieve the voltage-based fuel gauge indication and distinguish charge mode from boost mode.

To guarantee safe operation, the EV2632 has input over-voltage protection, battery over-voltage protection, thermal shutdown, battery temperature monitoring, and a programmable timer to prevent prolonged charging of a dead battery.

$25.00 + tax


Quality Policy, Certificates & Reliability Reports
All MPS parts are lead-free, halogen-free and adhere to the RoHS directive. See Environmental section for details.