MP2603

Active

Single-Cell 150mA Linear Li-Ion Battery Charger



Learn about our Evaluation Kit
Talk to an Engineer or get a Quote

Product Description

The MP2603 is a low cost single cell Li-ion battery charger IC suitable for low charge current applications. It features constant current (CC) and constant voltage (CV) charging modes with programmable charge current (50mA-150mA), trickle charge and charge status indication. The MP2603 is enabled with an input supply voltage greater than 3.5V. The charger IC is disabled when unplugged from the AC adaptor. To minimize the charger?s total solution cost, the MP2603 does not need an external reverse blocking diode, a precision current-sense resistor or a compensation capacitor at the output. MP2603 is available in a 5-pin TSOT23 package.

Product Features

  • VIN Surge Up to 25V
  • 0.75% VBATT Accuracy
  • Low Battery Reverse Current, (< 1uA)
  • Programmable Charge Current
  • Over Temperature Protection
  • Over Current Protection
  • Charge Status Indication
  • Over Charge Protection
  • No External Sense Resistor Required
  • No External Reverse Blocking Diode Required
  • No Output Capacitor Required for Stability

Parametrics

  • Icharge (max) (A)0.15
  • Vbatt (max) (V)4.2
  • Operating Vin (max) (V)5.25
  • Absolute Vin (max) (V)25
  • Vbatt (min) (V)4.2
  • NTC MonitoringNo
  • Operating Vin (min) (V)2.8
  • Special FeaturesThermal Regulation, USB Compatible
  • Cells1
  • GradeCatalog
  • Battery TypeLi-Ion, Li-Polymer
  • Control InterfaceStandalone
  • TimerNo
  • Power PathNo
  • USB ModeNo
  • PackageTSOT23-5

Single Cell 150mA Linear Li-Ion Battery Charger Evaluation Board

The EV2603EJ-00B is an evaluation board for the MP2603, a low cost single cell Li-ion battery charger IC suitable for low charge current applications.

The MP2603 features constant current (CC) and constant voltage (CV) charging modes with programmable charge current (50mA–150mA), trickle charge and charge status indication.

The MP2603 is enabled with an input supply voltage greater than 3.5V. The charger IC is disabled when unplugged from the AC adaptor. To minimize the charger’s total solution cost, the MP2603 does not need an external reverse blocking diode, a precision current-sense resistor or a compensation capacitor at the output. The MP2603 is available in a 5-pin TSOT23 package.

$25.00 + tax


Quality Policy, Certificates & Reliability Reports
All MPS parts are lead-free, halogen-free and adhere to the RoHS directive. See Environmental section for details.