MPQ86960

50A, Monolithic Half-Bridge Intelli-Phase^TM Solution in an LGA-38 (5mmx6mm) Package, AEC-Q100 Qualified

Datasheet

Description

The MPQ86960 is a monolithic half-bridge with built-in internal power MOSFETs and gate drivers. It can achieve up to 50A of continuous output current (I_OUT) across a wide input voltage (V_IN) range. The integrated MOSFETs and drivers achieve high efficiency through an optimized dead time (DT) and reduced parasitic inductance.

The MPQ86960 is compatible with tri-state output controllers. It also includes general-purpose current sensing and temperature sensing. The MPQ86960 is ideal for autonomous driving applications where efficiency and compact size are at a premium.

The MPQ86960 is available in an LGA-38 (5mmx6mm) package.

Features & Benefits

Wide Operating Input Voltage (V_IN) Range
50A Output Current (I_OUT)
Accepts Tri-State Pulse-Width Modulation (PWM) Signal
Built-In Switch for Bootstrap (BST)
Accu-Sense^TM Current Sense
Temperature Sense
Current-Limit Protection and Fault Flag
Over-Temperature Protection (OTP) and Fault Flag
Catastrophic Protection and Fault Flag
Used for Multi-Phase Operation
Available in an LGA-38 (5mmx6mm) Package
Available in AEC-Q100 Grade 1

Active Part Numbers:

MPQ86960GMJT-AEC1-Z MPQ86960GMJT-AEC1-P

Meaning of P & Z

Related Products

MPQ2967GQKTE Dual-Rail, Digital, 4-Phase Controller with PMBus Interface, AEC-Q100 Qualified

The MPQ2967 is a digital, dual-rail, multi-phase controller for autonomous driving applications. It can work with MPS’s Intelli-PhaseTM products to complete the multi-phase voltage regulator (VR) solution with minimal external components. The device can be configured for up to 4 phases between two rails.

The on-chip, multiple-time programmable (MTP) memory stores and restores device configurations. Device configurations and fault parameters can be configured or monitored via the PMBus interface. The MPQ2967 can monitor and report the output current (I_OUT) through the Intelli-Phase^TM current-sense (CS) output.

The MPQ2967 is based on unique, digital, multi-phase nonlinear control to provide fast transient response to a load step with minimal output capacitors. With only one power loop control method for both the steady state and load transient response, power loop compensation is simple to configure.

The MPQ2967 is available in a TQFN-40 (6mmx6mm) package.