MPQ2908A-AEC1

Automotive Grade. 4V-60V Input, Current Mode, Synchronous Step-Down Controller

Datasheet

Description

The MPQ2908A is a high-voltage, synchronous, step-down controller that directly steps down voltages from up to 60V. The MPQ2908A uses pulse-width modulation (PWM) current control architecture with accurate cycle-by-cycle current limiting and is capable of driving dual N-channel MOSFETs.
Advanced asynchronous mode (AAM) enables non-synchronous operation to optimize light-load efficiency.
The operating frequency of the MPQ2908A can be programmed by an external resistor or synchronized to an external clock for noise-sensitive applications. Full protection features include precision output over-voltage protection (OVP), output over-current protection (OCP), and thermal shutdown.
The MPQ2908A is available in TSSOP20-EP and QFN-20 (3mmx4mm) packages.

Features & Benefits

Wide 4V to 60V Operating Input Range
Dual N-Channel MOSFET Driver
0.8V Voltage Reference with ±1.5% Accuracy Over Temperature
Low Dropout Operation: Maximum Duty Cycle at 99.5%
Programmable Frequency Range: 100kHz -1000kHz
External Sync Clock Range: 100kHz -1000kHz
180º Out-of-Phase SYNCO Pin
Programmable Soft Start (SS)
Power Good (PG) Output Voltage Monitor
Selectable Cycle-by-Cycle Current Limit
Output Over-Voltage Protection (OVP)
Over-Current Protection (OCP)
Internal LDO with External Power Supply Option
Programmable Forced CCM and AAM
Available in TSSOP20-EP and QFN-20 (3mmx4mm) Packages
AEC-Q100 Grade-1

Active Part Numbers:

MPQ2908AGF-P MPQ2908AGF-Z MPQ2908AGL-P MPQ2908AGL-Z MPQ2908AGF-AEC1-P MPQ2908AGF-AEC1-Z MPQ2908AGL-AEC1-P MPQ2908AGL-AEC1-Z MPQ2908AGLE-AEC1-P MPQ2908AGLE-AEC1-Z

Meaning of P & Z

Evaluation Tools

EV2908A-F-02A Evaluation Kit Wide Input, Current Mode Synchronous Step-Down Controller Evaluation Board

The EV2908A-F-02A is an evaluation board for MP2908A/MPQ2908A, a high voltage, synchronous step-down switching regulator controller that can directly step-down voltages from up to 60V.

It uses PWM current control architecture with accurate cycle-by-cycle current limiting and is capable of driving dual N-channel MOSFETs.

Advanced asynchronous mode (AAM) enables non-synchronous operation to optimize light-load efficiency.

The operating frequency of the MP2908A/MPQ2908A can be programmed by an external resistor or synchronized to an external clock for noise-sensitive applications. Full protection features include precision output over-voltage protection (OVP), output over-current protection (OCP), and thermal shutdown.

The EV2908A-F-02A is assembled and tested with TSSOP20-EP package.

$25.00
+ tax