700V, Non-Isolated, Offline Regulator with Integrated LDO, Up to 2W of Output Power
You have a basic account.A myMPS+ account is needed.Upgrade to myMPS+
Session Titefor popup
The MP163 is a primary-side regulator that provides accurate, dual-output, constant voltage (CV) regulation without an optocoupler. The MP163 supports buck, boost, buck-boost, and flyback topologies and has an integrated 700V MOSFET and an LDO to simplify the structure and reduce cost. These features make the MP163 an ideal regulator for offline, low-power applications, such as home appliances and standby power. The MP163 is a green-mode operation regulator. Both the peak current and switching frequency decrease as the load decreases. This feature provides excellent efficiency at light load and improves overall average efficiency. Full protection features include thermal shutdown, VCC under-voltage lockout (UVLO), overload protection (OLP), short-circuit protection (SCP), and open-loop protection. The MP163 is available in SOIC16 and SOIC8-7B packages.
- Show more Show less
Log in to your account
Create New Account
Features & Benefits
- Primary-Side Constant Voltage (CV) Control, Supporting Buck, Boost, Buck-Boost, and Flyback Topologies
- Integrated 700V MOSFET and Current Source
- Internal LDO, Optimized for Dual Output Applications
- Less than 30mW of No-Load Power Consumption
- Up to 4W of Output Power
- Low VCC Operating Current
- Frequency Foldback
- Limited Maximum Frequency
- Peak-Current Compression
- Internally Biased VCC
- Thermal Shutdown, UVLO, OLP, SCP, and Open-Loop Protection
- Available in SOIC16 and SOIC8-7B Packages
Active Part Numbers:
MP163AGS-33-Z MP163AGS-5-Z MP163AGSE-33-Z MP163AGSE-5-Z MP163AGSE-33
EV163-SE-00A Evaluation Kit Universal Input, Dual-Output, Non-Isolated Offline Regulator, Evaluation Board
The EV163-SE-00A evaluation board is designed to demonstrate the capabilities of the MP163. The MP163 is a primary-side, constant voltage regulator providing accurate constant voltage (CV) regulation without an opto-coupler. It supports buck, buck-boost, boost, and flyback topologies. The EV163-SE-00A evaluation board is designed as a buck application. The EV163-SE-00A typically drives a 12V/70mA, 3.3V/50mA output from 85VAC to 265VAC, at 60/50Hz.
The EV163-SE-00A has excellent efficiency, and meets 1kV IEC61000-4-5 surge immunity and EN55022 conducted EMI requirements. The MP163 features various protections, including thermal shutdown (TSD), VCC under-voltage lockout (UVLO), overload protection (OLP), short-circuit protection (SCP), and open-loop protection.
The MP163AGSE-33 is used in this evaluation board, it is in an SOIC-16 package. This board can be used for MP163B and MP163C evaluation.