MPQ6653-AEC1

MPQ6653-AEC1

35V, Single-Phase BLDC Motor Driver with Embedded Hall Sensor, AEC-Q100 Qualified

Datasheet

Description

The MPQ6653-AEC1 is a single-phase brushless DC (BLDC) motor driver with integrated power MOSFETs and an embedded Hall sensor. It drives a single-phase BLDC motor, with up to 1.2A of phase peak current. The input voltage (V_IN) range is between 5.5V and 35V.

The MPQ6653-AEC1 controls the motor speed through the pulse-width modulation (PWM) signal or the DC voltage on the PWM pin. The device features configurable soft commutation and a Hall offset angle that can flexibly optimize performance.

The MPQ6653-AEC1 also provides rotational speed detection. The rotational speed detector (the FG/RD pin) is an open-drain output that outputs a high or low voltage relative to the internal Hall comparator’s output.

Rich protections include input over-voltage protection (OVP), under-voltage lockout (UVLO), locked-rotor protection, over-current protection (OCP), and thermal shutdown protection.

The MPQ6653-AEC1 is available in TSOT23-6-SL and TSOT23-6 packages, and it is available in AEC-Q100 Grade 1.

Features & Benefits

5.5V to 35V Operating Input Voltage (V_IN) Range
On-Chip Hall Sensor
Integrated High-Side MOSFET (HS-FET) and Low-Side MOSFET (LS-FET): 960mΩ
Soft Commutation
Starting Duty Set with Hysteresis
Selectable Open-Loop or Closed-Loop Speed Control
Configurable Soft-Acceleration Time
Configurable Hall Leading/Lag Angle
Supports 50Hz to 100kHz Pulse-Width Modulation (PWM) Input Frequency or DC Input
Automatic Reverse Current Block
24kHz Pulse-Width Modulation (PWM) Output Frequency
Configurable Current Limit
Short-Circuit Protection (SCP)
Over-Voltage Protection (OVP)
Standby Mode
Selectable FG and RD Output
Available in TSOT23-6-SL and TSOT23-6 Packages
Available in AEC-Q100 Grade 1

Active Part Numbers:

MPQ6653GJS-xxxx-AEC1-Z MPQ6653GJ-xxxx-AEC1-Z MPQ6653GJS-0000-AEC1-Z MPQ6653GJ-0000-AEC1-Z MPQ6653GJS-xxxx-AEC1-P MPQ6653GJ-xxxx-AEC1-P MPQ6653GJS-0000-AEC1-P MPQ6653GJ-0000-AEC1-P

Meaning of P & Z

Related Products

MP6653GJ 32V, Single-Phase BLDC Motor Driver with Embedded Hall Sensor

The MP6653 is a single-phase brushless DC (BLDC) motor driver with integrated power MOSFETs and an embedded Hall sensor. It can drive a single-phase BLDC motor, with up to 1.2A of peak output current (I_OUT) across a 5.5V to 32V input voltage (V_IN) range.

The MP6653 controls the motor speed through the pulse-width modulation (PWM) signal or DC voltage on the PWM pin. The device features soft commutation and a Hall offset angle that can be flexibly configured to optimize performance.

The MP6653 also has rotational speed detection. The rotational speed detector (the FG/RD pin) is an open-drain output. It outputs a high or low voltage relative to the internal Hall comparator’s output.

Rich protection features include input over-voltage protection (OVP), under-voltage lockout (UVLO), locked-rotor protection, over-current protection (OCP), and thermal shutdown.

The MP6653 is available in TSOT23-6-SL and TSOT23-6-L packages.