MPQ6527-AEC1

MPQ6527-AEC1

40V, 0.8A, 10-Channel Half-Bridge Motor Driver with Serial Input Control, AEC-Q100 Qualified

Datasheet

Description

The MPQ6527-AEC1 is a ten-channel half-bridge DMOS output driver with integrated power MOSFETs. It can achieve up to 0.8A of output current (I_OUT) across a wide 5.5V to 40V input voltage (V_IN) range.

The half-bridges can be controlled separately via a standard serial data interface, and each half-bridge has various diagnostic functions. The device has a very low quiescent current (I_Q) in standby mode.

Full protection features include short-circuit protection (SCP), under-voltage protection (UVP), and thermal shutdown. The MPQ6527-AEC1 requires a minimal number of readily available, standard external components, and is available in a TSSOP-28EP package.

Features & Benefits

Wide 5.5V to 40V Operating Input Voltage (V_IN) Range
High-Side MOSFET (HS-FET) and Low-Side MOSFET (LS-FET) Drivers Connected in Half-Bridge Configurations
Up to 0.8A Output Current (I_OUT)
Typical 1.3Ω HS-FET and LS-FET R_DS(ON)
Low Quiescent Current (I_Q) in Standby Mode vs. Total Temperature Range
Output Short-Circuit Protection (SCP)
Over-Temperature Protection (OTP) and Pre-Warning
Under-Voltage Lockout (UVLO) Protection
Over-Voltage Lockout (OVLO) Protection
Serial Data Interface
Diagnostic Functions Include:
- Shorted Output
- Open-Load Detection
- Over-Temperature (OT)
- Over-Voltage (OV)
- Under-Voltage (UV)
Up to 5MHz Serial Interface Clock Frequency
Supports 3.3V and 5V Systems
Available in a TSSOP-28EP Package
Available in AEC-Q100 Grade 1

Active Part Numbers:

MPQ6527GF-AEC1-Z MPQ6527GF-AEC1-P

Meaning of P & Z

Related Products

EVKT-MOTOR-00A Communication Interface Device for USB Motor Driver Interface

The EVKT-MOTOR-00A is a communication interface device that provides an interface between a USB and a serial peripheral interface (SPI) or I²C communication interface. It is designed to work with MPS’s motor drivers that use a serial interface, as well as the motor driver programming graphic user interface (GUI) tool.

The EVKT-MOTOR-00A kit includes one USB communication device interface, one USB cable, and one 10-pin ribbon cable. Together with MPS’s Motor Driver Programming GUI, the EVKT-MOTOR-00A provides a quick and simple way to evaluate the performance of MPS motor drivers with serial interfaces.

$50.00
+ tax

EVQ6527-F-00A

40V, 0.8A Deca Half-Bridge Motor Driver Evaluation Board

Motor Driver Programming GUI

The Motor Driver Programming GUI can be used to configure MPS motor drivers via an SPI or I²C interface.

MP6527GF

40V, 0.8A, 10-Channel, Half-Bridge Motor Driver with Serial Input Control