Order- MPQ4483-AEC1
MPQ4483-AEC1
3A, 36V Step-Down Converter with DCP Mode, CDP Mode, and Ground-to-Battery Short Protection for Automotive, AEC-Q100 Qualified
Session textval
Session Titefor popup
Description
The MPQ4483 is a high-frequency, synchronous, rectified, step-down switch-mode converter. It can achieve up to 3A of output current (IOUT) across a wide input voltage (VIN) range, with excellent load and line regulation. The MPQ4483 provides synchronous mode to achieve higher efficiency across the output load range.
The MPQ4483 provides a constant-current (CC) limit function for the output with two adjustable CC limit thresholds. The device also supports BC 1.2 dedicated charging port (DCP) mode and charging downstream port (CDP) mode.
Fault condition protections include current limiting in hiccup mode, over-voltage protection (OVP), ground-to-battery short protection, and thermal shutdown.
The MPQ4483 requires a minimal number of readily available, standard external components, and is available in a QFN-25 (4mmx5mm) package.
-
Show more
Show less
Features & Benefits
- Supports BC 1.2 Charging Downstream Port (CDP) Mode
- Supports BC 1.2 Dedicated Charging Port (DCP) Mode, Apple Divider Mode, and 1.2V/1.2V Mode
- Supports Bidirectional USB 2.0 High-Speed Data Switch
- 4.2V to 36V Operating Input Voltage (VIN) Range
- Up to 3A Output Current (IOUT)
- Internal, Automatic Enable (EN) Pull-Up
- 25mΩ and 20mΩ Low On Resistance (RDS(ON)) Internal Buck Power MOSFETs
- Integrated 4mΩ Ground-Sensing Resistor
- 200kHz to 2.2MHz Adjustable Frequency
- Adjustable, Two-Level Constant-Current (CC) Limit
- Forced Pulse-Width Modulation (PWM) Mode
- 200kHz to 2.2MHz SYNC Frequency
- Spread Spectrum Option with 450kHz Switching Frequency (fSW)
- EN Shutdown Discharge
- Low-Dropout (LDO) Mode
- Battery-to-Ground Short Protection Driver
- Output Over-Voltage Protection (OVP)
- Adjustable Line Drop Compensation
- Supports 1V to 20V Adjustable Output
- Available in a QFN-25 (4mmx5mm) Package with Wettable Flanks
- Available in AEC-Q100 Grade 1
Active Part Numbers:
MPQ4483GV-AEC1-Z MPQ4483GV-AEC1-P MPQ4483GV-FD-AEC1-Z MPQ4483GV-FD-AEC1-P
Part numbers ending in P and Z are the same parts. P and Z only indicates reel size.
Meaning of P & Z
MPQ4483-AEC1 Resources
-
PRODUCT CATEGORY
STEP-DOWN/STEP-UP CONVERTERSPRODUCT CATEGORY -
APPLICATION
INFOTAINMENT SYSTEMSAPPLICATIONAutomotive in-vehicle infotainment systems are becoming increasingly software-driven to enhance safety and security, as well as the overall driving experience. Modern cars integrate driving and environmental information, passenger entertainment, wireless connections, and navigation into a centralized infotainment system architecture. However, with the rise of sophisticated in-vehicle infotainment ...
-
APPLICATION
STANDARD USB TYPE-C/TYPE-AAPPLICATIONStandard USB Type-C and Type-A designs for automotive applications are more popular than ever. USB ports have become an expected standard in most car models, and many offer both charging and data functionality, as well as support for USB 2.0 and 3.0. These designs are tasked with optimizing efficiency, preserving signal integrity across a variety of possible cables, and adhering to strict automoti...
-
PRODUCT
MPQ4208-AEC1PRODUCT80V, Synchronous Buck-Boost Controller with I2C And Adjustable OCP and PG Indication, AEC-Q100 Qualified
-
PRODUCT
MPQ4232-AEC1PRODUCT6A Buck-Boost Converter with Four Integrated MOSFETs and I2C Interface, AEC-Q100 Qualified
-
PRODUCT
MPQ4263-AEC1PRODUCT36V, 140W Buck-Boost with Integrated LS-FETs, Supports High-Side Current Sense and I2C Interface for Automotive, AEC-Q100 Qualified
-
PRODUCT
MPQ4262-AEC1PRODUCT36V, 100W, Buck-Boost Converter with Integrated Low-Side MOSFETS and an I2C Interface for Automotive, AEC-Q100 Qualified
-
PRODUCT
MPQ4233A-AEC1PRODUCT36V, 3A, Buck-Boost Converter with Four Integrated MOSFETs and I2C Interface, AEC-Q100 Qualified
-
PRODUCT
MPQ4232A-AEC1PRODUCT36V, 6A Buck-Boost Converter with Four Integrated MOSFETs and I2C Interface, AEC-Q100 Qualified
-
PRODUCT
MPQ4233-AEC1PRODUCT36V Tolerant, 3A Buck-Boost Converter with Four Integrated MOSFETs and I2C Interface, AEC-Q100 Qualified
-
PRODUCT
MPF52001-AEC2PRODUCTSingle USB PD Controller for Source Port, Supporting Firmware Update and Advanced PDP Management, AEC-Q100 Qualified
-
PRODUCT
MPQ70700FS-AEC1PRODUCTMPSafeTM, ASIL-D, 5.5V PMIC for SoCs with 5 LDOs, 4 GPIOs, and 2 Voltage Monitors, AEC-Q100 Qualified
-
PRODUCT
MPQ70165FS-AEC1PRODUCTMPSafeTM, ASIL-B, 5.5V PMIC with 6 Buck Converters, AEC-Q100 Qualified
-
PRODUCT
MPQ2283-AEC1PRODUCT6V, 6A, Configurable, High-Frequency, Synchronous Buck Converter with ZDPTM, AEC-Q100 Qualified
-
PRODUCT
MPQ5862-AEC1PRODUCT16V, 1.5A, Dual-Channel, High-Side Switch, AEC-Q100 Qualified
-
PRODUCT
MPQ8880A-AEC1PRODUCT60V, 4.5A, High-Efficiency, Digital, Configurable, Synchronous Step-Down Converter with PMBus Interface, AEC-Q100 Qualified
-
PRODUCT
MPQ8872-AEC1PRODUCT36V, 2A, Four-Switch, Synchronous Buck-Boost Converter with I2C Interface, AEC-Q100 Qualified
-
PRODUCT
MPQ7932-AEC1PRODUCTMPSafeTM-Compatible, 5.5V PMIC with 6 Buck Converters, AEC-Q100 Qualified
-
PRODUCT
MPQ3446-AEC1PRODUCT55V, Wide-Input, Current-Mode, Synchronous Boost Controller, AEC-Q100 Qualified
-
PRODUCT
MPQ70336FS-AEC1PRODUCTMPSafeTM, ASIL-D, 36V, 4A Buck Converter with 4-Channel Voltage Monitor PMIC, AEC-Q100 Qualified
-
PRODUCT
MPQ4331-AEC1PRODUCT36V, 0.5A to 1A, Low Quiescent Current, Synchronous Step-Down Converter, AEC-Q100 Qualified
-
PRODUCT
MPQ5852-AEC1PRODUCT36V, Smart Diode Controller with Two Voltage Monitors, AEC-Q100 Qualified
-
PRODUCT
MPQ8835A-AEC1PRODUCT36V, 6A, Four-Switch, Synchronous Buck-Boost Converter with I2C Interface, AEC-Q100 Qualified
-
PRODUCT
MPQ8874-AEC1PRODUCT36V, 4A, Four-Switch, Synchronous Buck-Boost Converter with I2C Interface, AEC-Q100 Qualified
-
PRODUCT
MPQ3321-AEC1PRODUCT48-Channel, Max 80mA/Ch, Current Source LED Driver with Independent Analog and PWM Dimming, AEC-Q100 Qualified
Log in to your account
Create New Account