MPM82504

MPM82504

16V, Quad 25A, Scalable, DC/DC Power Module with PMBus

Datasheet

Description

The MPM82504 is a quad 25A, scalable, fully integrated power module with a PMBus interface. The device offers a complete power solution that achieves up to 25A per output channel. The MPM82504 has four output channels that can be paralleled to provide 50A, 75A, or 100A of output current for flexible configurations. The device can also operate in parallel with the MPM3695-100 and additional MPM82504 devices to provide a higher output current. The MPM82504 operates at high efficiency across a wide load range.

The device utilizes MPS’s proprietary, multi-phase constant-on-time (MCOT) control, which provides ultra-fast transient response and simple loop compensation. The PMBus interface enables flexible digital configurations and monitoring of key parameters.

Full protection features include over-current protection (OCP), over-voltage protection (OVP), under-voltage protection (UVP), and over-temperature protection (OTP).

The MPM82504 requires a minimal number of readily available external components. It is available in a BGA (15mmx30mmx5.18mm) package.

Features & Benefits

3.2V to 16V Input Voltage Range with External 3.3V VCC Bias
4V to 16V Input Voltage Range with Internal VCC Bias
0.5V to 3.3V Output Voltage Range
Four Parallelable Output Channels with Up to 25A per Channel
Parallel Operation with Multiple MPM82504 and MPM3695-100 Devices
Auto-Interleaving for Multi-Phase Operation
Individual Remote Sense for Each Channel
PMBus 1.3 Compliant
Telemetry Readback including VIN, VOUT, IOUT, Temperature, and Faults for Each Channel
Each Channel Is Configurable via the PMBus:
Output Voltage, Soft-Start Time
Over-Current, Over-Temperature, Over-Voltage, Under-Voltage, and UVLO Limits
PWM Mode and Switching Frequency
Available in a BGA (15mmx30mmx5.18mm) Package

Active Part Numbers:

MPM82504GBH-xxxx MPM82504GBH-0000-T MPM82504GBH-0001-T MPM82504GBH-0001 MPM82504GBH-0000

Evaluation Tools

Virtual Bench Pro 4.0 Evaluation Kit Graphical User Interface (GUI) Supported by MPS Used to Configure and Monitor Multiple MPS Digital Power Solutions with an I²C Interface

The Virtual Bench Pro 4.0 is a Graphical User Interface (GUI) supported by MPS used to configure and monitor multiple MPS digital power solutions with an I²C Interface. This GUI is an intuitive tool that can be used with MPS evaluation kits and helps assist in the evaluation and in the testing phases of your design.

Hardware & Software Requirements:

USB to I2C Communication Device EVKT-USBI2C-02
PC running Window 7 or later
.Net Framework 4.0 or later

Features:

Support PMBus open standard protocol. Common commands such as setting the output, switching frequency, etc
Provide tips for the parameter configuration of the digital power solution
Monitor real-time data and displayed values by the GUI such as: