Overview
Evaluation Tools
Design Resources
Technical Forum
Quality

MP9928

4V-60V Input, Current Mode, Synchronous Step-Down Controller

Active

Datasheet

Description

The MP9928 is a high-voltage, synchronous step-down switching regulator controller that can directly step down voltages from up to 60V. The MP9928 uses PWM current control architecture with accurate cycle-by-cycle current limiting. It is capable of driving dual N-channel MOSFET switches.
AAM Mode (Advanced asynchronous mode) enables non-synchronous operation and PFM mode to optimize light load efficiency.
The operating frequency of MP9928 can be programmed by an external resistor or synchronized to an external clock for noise-sensitive applications. Fault protections are available including a precision output over voltage protection (OVP), output over current protection (OCP), and thermal shutdown.
The MP9928 is available in TSSOP20-EP package and QFN-20 (3mmx4mm) package.

Features & Benefits

Wide 4V to 60V Operating Input Range
Dual N-Channel MOSFET Driver
Low Dropout Operation: Maximum Duty Cycle at 99.5%
Programmable Frequency Range: 100kHz -1000kHz
180º Out-of-Phase SYNCO
External Soft-Start and PG Pin
Selectable Cycle-by-Cycle Current Limit
Output Over Voltage Protection
Internal LDO with Externally Power Supply Option
Programmable CCM and AAM Pulse-Skipping Mode
Accuracy Over Temperature Protection
TSSOP20-EP package and QFN-20 (3mmx4mm) Package

Evaluation Tools

6EV9928-F-00B Evaluation Kit 0V Current Mode, Synchronous Step-Down Controller Evaluation Board

The EV9928-F-00B Evaluation Board is designed to demonstrate the capabilities of MP9928. The MP9928 is a high-voltage, synchronous step-down controller that directly steps down voltages from up to 60V. The MP9928 uses PWM current control architecture with accurate cycle-by-cycle current limiting and is capable of driving dual N-channel MOSFETs.

The operating frequency of the MP9928 can be programmed by an external resistor or synchronized to an external clock for noise sensitive applications. Full protection features include precision output over-voltage protection (OVP), output over-current protection (OCP), and thermal shutdown.

The MP9928 is available in TSSOP20-EP and QFN-20 (3mmx4mm) packages. This board is available in TSSOP20-EP package.

$25.00
+ tax

Buy direct from MPS