MP8040

MP8040

9A, 24V Integrated Half-Bridge

Datasheet

Description

The MP8040 is a general purpose, high frequency half bridge power driver capable of driving a 9A load. The device integrates both top and bottom N-Channel MOSFET power switches and is fully protected from both sourcing and sinking current by a preset cycle by cycle current limit. It has a wide input voltage range from 7.5V to 25V. The MP8040 features a low-current shutdown mode, input under-voltage protection, thermal shutdown, and fault flag signal output. It interfaces with standard logic signals and is available in a small 8-pin SOIC with exposed pad package.

Features & Benefits

±9A Peak Current Output
±4.25A Continuous Current Output
Up to 1.2MHz Switching Frequency
Protected Integrated Power 100mΩ Switches
All Switches Current Limited
Integrated Under-Voltage Protection
Integrated Thermal Protection
2.5µA Standby Mode
True 2-Quadrant Operation
Sources and Sinks Current
Fault Indicator Output

Active Part Numbers:

MP8040DN-LF-P MP8040DN-LF-Z

Meaning of P & Z

Related Products

EV8040-N-00A Full-Bridge or Single-Ended Audio Amplifier Evaluation Board

The EV8040-N-00A is an evaluation board designed to demonstrate the capabilities of MPS’s MP8040. It can be configured as a stereo single-ended amplifier or a full-bridge mono amplifier.

The MP8040 is a general purpose, highfrequency, half-bridge power driver. It integrates both top and bottom N-channel MOSFET power
switches. It interfaces with standard logic signals, and is available in small, 8-lead SOIC package

$75.00
+ tax