MP8001

Active

15W Power Over Ethernet (PoE) Powered Device (PD) Controller



Learn about our Evaluation Kit
Talk to an Engineer or get a Quote

Product Description

The MP8001/MP8001A are IEEE 802. 3 af POE compliant Powered Device (PD) controllers. they include detection and classification modes as well as a 100V output pass device having a temperature compensated current limit over the specified temperature range. Thermal protection is built in to accommodate both transient and/or overload conditions, shutting the part down and protecting the input source as well as the output load depending on the particular fault conditions. Inrush current limiting is included to slowly charge the input capacitor without interruption due to die heating, a problem encountered without the current limit foldback feature.

Product Features

  • Meets IEEE 802. 3 af Specifications
  • 100V, 1O Integrate DMOS Device
  • 420mA Current Limit for MP8001, 810mA Current Limit for MP8001A
  • Open Drain Power Good Output
  • SOIC-8 Package

Parametrics

  • GradeCatalog
  • PoE Standards Supported802. 3 af
  • PoE Ilimit (mA)420
  • PoE Inrush Limit (mA)150
  • Pass Switch Rds(on) (Ω)1
  • PackageSOIC-8
  • Fault ResponseLatch off

IEEE 802.3af PoE Powered Device (PD) EV Board

EV3908+8001-00A is designed as the Power over Ethernet (PoE) Powered Device (PD) module. An RJ-45 connector is provided to connect directly to an Ethernet cable having a Power Sourcing Equipment (PSE) driving it on the other end. It also accepts power applied using a stand-alone power supply.

According to the IEEE 802.3af specification, the PD module must provide the circuitry needed to be detected by the PSE as it polls the Ethernet links. The IEEE 802.3af specification also allows the option for the PD to provide classification as to the amount of power needed by the PD Module. EV3908+8001-00A with the MP8001DS provides all the necessary hardware to provide detection and classification together with programmable inrush current limit, power good indicator, thermal protection and current limit. An external 13W Flyback converter is connected as the PWM part of the PD, which is controller by the synchronous PWM controller MP3908DS with soft-start, slope compensation and peak current limiting.

$25.00 + tax


Quality Policy, Certificates & Reliability Reports
All MPS parts are lead-free, halogen-free and adhere to the RoHS directive. See Environmental section for details.