Toggle Nav
Menu
close
Select Store
EN
Cart 0
Account
Cart 0

  • Cart

  • Compare Products
Select Store
EN
Search
Search (Parametric or keywords)

Parametric Search DC-DC

Input

Output

Show 589 Results

Parametric Search Modules

Input

Output

Show 61 Results

Parametric Search BMS

Input

Output

1 cell
2 cell
3 cells
4 cells
5 cells
Show 64 Results

Parametric Search ALL

Input

Output

Show 1664 Results
code is temp removed to debug

MP6507

Active
700mA Bipolar Stepper Motor Driver
Loading...
Learn about our Evaluation Kit
Talk to an Engineer or get a Quote

DOWNLOAD DATA SHEET PDF

mp6507_r1.05.pdf

You have a basic account.
A myMPS+ account is needed.

Upgrade to myMPS+

Product Description

The MP6507 is a bipolar stepper-motor driver with dual, built-in full-bridges consisting of N-channel power MOSFETs. It operates from a supply voltage range of 2.7V to 15V, and can deliver motor current up to 700mA per channel. The internal safety features include sinking and sourcing current limits implemented with external sensors, under-voltage lockout and thermal shutdown. An over-temperature output flag is available to indicate thermal shutdown. The MP6507 is available in both 16-pin, 5.0mm×6.4mm TSSOP-EP and 3mm×3mm QFN package with an exposed thermal pad on the back.

Product Features

  • Wide 2.7V-to-15V Input Voltage Range
  • Two Internal Full-Bridge Drivers
  • Low MOSFET On Resistance (HS: 500mO; LS: 500 mO)
  • Internal Charge Pump for the High-Side Driver
  • Low Quiescent Current: 1.1mA
  • Low Sleep Current: 1µA
  • Thermal Shutdown and Under-Voltage Lockout Protection
  • Over-Temperature Output Flag
  • Thermally-Enhanced Surface-Mount Package

Parametrics

  • Number of Half-Bridges4
  • Control InterfacePWM
  • PackageQFN-16 (3x3), QFN-16 (4x4), TSSOP16, TSSOP16 EP
  • Step Mode1, 1/2
  • GradeCatalog
  • Iout (max) (A)0.7
  • Vin (max) (V)15
  • Vin (min) (V)2.7

Evaluation Kit

GET THIS KIT

Kit details

The EV6507GF-00A is an evaluation board for the MP6507GF, a bipolar stepper motor driver with dual, built-in full-bridges consisting of N-channel power MOSFETs.

It operates from a supply voltage range of 2.7V to 15V, and can deliver output current up to 700mA per channel. The safety features include sinking and sourcing current limits implemented with external sensors, under-voltage lockout and thermal shutdown. An over-temperature output flag is available to indicate thermal shutdown.

The EV6507GF-00A is a fully assembled and tested PCB. The input control signals for the MP6507GF are applied through the connector or generated on board. It can drive a bipolar stepper motor with both full step and half step mode. It also can drive two independent DC motors.

$75.00 + tax