MP3414

1.8A, 1MHz Synchronous, Step-up Converter with Output Disconnect

Datasheet

Description

The MP3414 is a high-efficiency, synchronous, current–mode, step-up converter with output disconnect. The MP3414 can start up from an input voltage as low as 0.8V to provide inrush current limiting, and output short-circuit protection. The integrated, P-channel, synchronous rectifier improves efficiency and eliminates the need for an external Schottky diode. The PMOS disconnects the output from the input when the part shuts down. This output disconnect feature allows the output to be completely discharged, thus allowing the part to draw a 1μA supply current in shutdown mode. The 1MHz switching frequency allows for smaller external components, while the internal compensation and the soft-start minimize the external component count: these feature help to produce a compact solution for a wide current load range. The MP3414 features an integrated power MOSFET that supports up to a 4V output and a typical 1.8A peak switching current. The MP3414 is available in a small 8-pin TSOT23 package.

Features & Benefits

Up to 96% Efficiency
0.8V Low Voltage Start-Up
0.6V-to-4V Input Range
1.8V-to-4V Output Range
Internal Synchronous Rectifier
1MHz Fixed-Frequency Switching
35μA Quiescent Current
1μA Shutdown Current
Current-Mode Control with Internal Compensation
True Output Disconnect from Input
VIN>VOUT Down Mode Operation
High Efficiency under Light-Load Conditions
Very Small External Components
Inrush Current Limiting and Internal Soft-Start
Over-Voltage Protection
Short-Circuit Protection
TSOT23-8 Package

Active Part Numbers:

MP3414AGJ-P MP3414AGJ-Z MP3414DJ-LF-P MP3414DJ-LF-Z

Evaluation Tools

EV3414A-J-00A Evaluation Kit 3A, 1MHz Synchronous Step-Up Converter with Output Disconnect Evaluation Board

EV3414A-J-00A Evaluation Board is designed to demonstrate the capability of MP3414A. The MP3414A is a high-efficiency, synchronous, current-mode, step-up converter with output disconnect.

The MP3414A provides inrush current limiting and output short-circuit protection. The integrated, P-channel, synchronous rectifier improves efficiency and eliminates the need for an external Schottky diode. The PMOS disconnects the output from the input when the part shuts down.

The 1MHz switching frequency allows for small external components, while the internal compensation and the soft-start minimize the external component count. The MP3414A is available in a small 8-pin TSOT23 package.

$25.00
+ tax

Design Resources