MP3309
Learn about our Evaluation Kit
You have a basic account.A myMPS+ account is needed.
Upgrade to myMPS+Product Description
Product Features
- 2.7V-to-5.5V Input Voltage
- Analog and PWM Dimming
- Selectable Synchronous or Non-synchronous Mode
- 400kHz I2C-Compatible Interface
- Digitally-Set LED Current
- Programmable Switching Frequency
- Programmable Over VoltageProtection Point
- Low 200mV Feedback Voltage with ±1%
- Software- or Hardware-Enable Function
- Internal Soft Start
- UVLO, Thermal Shutdown, OCP
- Available in a 1.4mm ×1.8mm QFN-10 package
- MP3309—Default Analog Dimming (PWMH) by external PWM signal input
- MP3309C—Default I2C Interface
Parametrics
- Isw Limit (A)1.5
- Ishutdown (µA)1
- Vin (min) (V)2.7
- Vin (max) (V)5.5
- Channels1
- fsw (min) (kHz)300
- fsw (max) (kHz)1200
- Vout (max) (V)35
- Vfb (V)0.2
- GradeCatalog
- Rds(on) (mΩ)300
- PackageQFN-10 (1.4x1.8)
- Power MOSFETIntegrated
- TopologyBoost
- Dimming (Output)P-Dim, A-Dim
- Iq (mA)0.42
- Typical LCD Screen SizesSmall (<10")
- Other FeaturesCABC, Sync Rectification
2.7V - 5.5V Input, 35V Output, Programmable Fsw, White LED Driver With 12C Interface Evaluation Board
The MP3309A is a WLED step-up converter for 2.7V-to-5.5V input that uses peak-current mode to regulate the LED current sensed through an external low-side resistor. The 200mV feedback voltage and synchronous rectification reduces power loss and reduces PCB space requirements. To connect an external Schottky accomplishes the non-synchronous mode for heavy load to improve the thermal performance.
The MP3309A features a programmable switching frequency to optimize efficiency. It supports both analog and PWM dimming.
In addition, the MP3309A has LED open protection, cycle-by-cycle current limit protection and thermal shutdown protection. The I2C interface can set the over-voltage protection threshold, analog dimming and read IC status. MP3309A is available in QFN10 3*3mm package.
$75.00 + tax
Log in to your account
Create New Account