Overview
Evaluation Tools
Quality

MP3202

2.5V-6Vin, 1.3A Boost WLED Driver

Active

Datasheet

Description

The MP3202 is a step-up converter designed for driving up to 39 white LEDs (13 strings of 3 LEDs each) from a 5V system rail. The MP3202 uses a current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV feedback voltage reduces power loss and improves efficiency. The OV pin monitors the output voltage and turns off the converter if an over-voltage condition is present due to an open circuit condition. The MP3202 includes under-voltage lockout, current limiting and thermal overload protection preventing damage in the event of an output overload. The MP3202 is available in small 6-pin TSOT23 or 8-pin QFN (2mm x 2mm) packages.

Features & Benefits

2.5V to 6V Input Voltage Range
On Board Power MOSFET
Drives up to 39 White LEDs at 5V Input
Up to 92% Efficiency
Over 1MHz Fixed Switching Frequency
Open Load Shutdown
Low 104mV Feedback Voltage
Soft-Start/PWM Dimming
UVLO, Thermal Shutdown
Internal 1.3A Current Limit
Available in TSOT23-6 and QFN8 Packages

Evaluation Tools

1EV3202-00A Evaluation Kit .3A Fixed Frequency White LED Driver Evaluation Board

The EV3202-00A is an evaluation board for the MP3202, a step-up converter designed for driving up to 39 white LEDs (13 strings of 3 LEDs each) from a 5V system rail, or 27 white LEDs from 4.5V to 6V.

The MP3202 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV feedback voltage reduces power loss and improves efficiency. The OV pin monitors the output voltage and turns off the converter if an over-voltage condition is present due to an open circuit condition.

The MP3202 includes under-voltage lockout, current limiting and thermal overload protection preventing damage in the event of an output overload.

$25.00
+ tax

Buy direct from MPS