JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

MP28310

300mA, 2V to 5.5V, 500nA IQ, Step-Down Converter with 300nA IQ, 2V to 5.5V, 100mA LDO Regulator in CSP-12 (1.2mmx1.6mm)

Overview
Design Resources
Technical Forum
Quality

Vin (Max) <= 7V
MP28310

MP28310

300mA, 2V to 5.5V, 500nA IQ, Step-Down Converter with 300nA IQ, 2V to 5.5V, 100mA LDO Regulator in CSP-12 (1.2mmx1.6mm)

Description

The MP28310 is a monolithic power management unit containing a 300mA, high efficiency, switching step-down converter, and a 100mA low-dropout (LDO) regulator. The ultralow 500nA quiescent current (IQ) provides extremely high efficiency when the load current is within the μA range. The MP28310's low 2V minimum input voltage allows the system to operate directly from the battery.

Constant-on-time (COT) control provides fast transient response and high light-load efficiency and requires minimal capacitance. Good regulation is achieved by integrating an error amplifier (EA) to correct the output voltage (VOUT).

The 100mA LDO regulator provides easy system configuration and a clean VOUT. The control (CTRL) pins control the on/off and VOUT selection functions. Fault protection features include under-voltage lockout (UVLO), over-current protection (OCP), and thermal shutdown.

The MP28310 requires a minimal number of readily available, standard external components, and is available in a small CSP-12 (1.2mmx1.6mm) package.

Features & Benefits

300mA Buck Converter
Ultra-Low 500nA Quiescent Current (IQ)
Wide 2V to 5.5V Operating Input Range
7 Selectable Output Voltages
Up to 300mA of Output Current
1.5MHz Switching Frequency in Continuous Conduction Mode (CCM)
100% Duty Cycle in Low-Dropout Mode
0.25Ω and 0.25Ω Internal Power MOSFET Switches
Cycle-by-Cycle Over-Current Protection (OCP)
Short-Circuit Protection (SCP) with Hiccup Mode
100mA LDO
Ultra-Low 300nA IQ
2V to 5.5V Operating Input Range
3 Selectable Output Voltages
Over-Temperature Protection (OTP)
Available in a CSP-12 (1.2mmx1.6mm) Package

Active Part Numbers:

MP28310GC-Z

Design Resources

DC DC Designer Online

Design online with MPS IC

Symbol, Footprint & 3D Model

30+ more formats Show more

Show more

Cad Symbols

Symbols (36)

Cad Footprints

Footprint (34)

Cad 3D Models

3D Models (15)

Buy direct from MPS

Talk to an Engineer or get a Quote

Technical Forum

Questions answered by MPS engineers in 24h

Varey the fsw of MP4423 / MPQ4423

Hello together, I’d like to use the MP4423 and varey the switching frequency of it. Therefore, I added a circuit to the en/sync Pin which is switching...

DC-DC POWER CONVERTERS

Latest activity 2 hours ago

MPQ4569 The bypass capacitor between the BST pin and the SW pin squeaks

The bypass capacitor between the BST pin and the SW pin squeaks

DC-DC POWER CONVERTERS

Latest activity 9 hours ago

EV3305DD-00A and value of C5 for 8 white leds

I have purchased the EV3305DD-00A based on the MP3305. I am using the evaluation board which says it is optimized to drive 3 white leds in series, 10...

DC-DC POWER CONVERTERS

Latest activity 13 hours ago

Get technical support

Quality Policy, Certificates & Reliability Reports

All MPS parts are lead-free, halogen-free and adhere to the RoHS directive. See Environmental section for details.

See All Quality Documents

reliability-report

Reliability Report

quality-policy

Quality Policy

iso-certificate

ISO Certificate

RoHS/Lead Free Policy