- MP2496
MP2496
You have a basic account.A myMPS+ account is needed.
Upgrade to myMPS+Session textval
Session Titefor popup
Description
The MP2496 integrates a monolithic, step-down, switch-mode converter with a single USB current-limit switch and charging port identification circuits. The MP2496 achieves 2.5A of continuous output current with excellent load and line regulation over a wide input supply range.
The output of the USB switch is current-limited. The MP2496 provides a USB dedicated charging port (DCP), which supports battery charging specification 1.2 (BC1.2), divider mode, and 1.2V/1.2V mode, eliminating the need for outside user interaction.
The output voltage has programmable line drop compensation.
Full protection features include hiccup current limiting, output over-voltage protection (OVP), and thermal shutdown.
The MP2496 requires a minimal number of readily available, standard, external components and is available in a QFN-26 (4mmx4mm) package.
-
Show more
Show less
Features & Benefits
- Wide 7V to 36V Operating Input Voltage Range
- Fixed 5V Output Voltage with Line Drop Compensation
- Accurate USB Output Current Limit
- 40mΩ/32mΩ Low-RDS(ON) Internal Buck Power MOSFETs
- 24mΩ Low-RDS(ON) Internal USB Power MOSFET
- 350kHz / 250kHz / 150kHz Frequency Selectable
- Programmable Line Drop Compensation
- Output Over-Voltage Protection (OVP)
- Hiccup Current Limit
- Supports DCP Scheme for BC1.2, Divider Mode, and 1.2V/1.2V Mode
- ±8kV HBM ESD Rating for USB, DP, and DM
- Available in a QFN-26 (4mmx4mm) Package

Active Part Numbers:
MP2496GR-P MP2496GR-Z MP2496MGR-P MP2496MGR-Z
Part numbers ending in P and Z are the same parts. P and Z only indicates reel size.
Meaning of P & Z
MP2496 Resources
-
APPLICATION
DOCKING STATIONSAPPLICATIONDocking stations offer a convenient way to plug in a laptop to common peripherals, such as DVI, COM, USB, and Ethernet — all with one connection. Typically, docking stations are made for a particular computer module, and offer different docking styles that allow a laptop computer to act like a desktop computer. With an increasing need for more peripherals and more complicated laptops, power design...
-
REFERENCE DESIGN
MAX 10REFERENCE DESIGN -
REFERENCE DESIGN
ARTIX ULTRASCALE+ AU20P/25P MINIMUM RAILS – SMALLEST SIZEREFERENCE DESIGN -
REFERENCE DESIGN
ARTIX ULTRASCALE+ AU20P/25P MINIMUM RAILS – LOWEST COSTREFERENCE DESIGN -
REFERENCE DESIGN
ARTIX ULTRASCALE+ AU10P/15P MINIMUM RAILS – LOWEST COSTREFERENCE DESIGN -
REFERENCE DESIGN
ZU1/2/3 FULL POWER MANAGEMENT – LOWEST COSTREFERENCE DESIGN -
REFERENCE DESIGN
ZU1/2/3 MINIMUM RAILS – LOWEST COSTREFERENCE DESIGN -
REFERENCE DESIGN
SPARTAN 7 PMIC SOLUTION WITH POWER SEQUENCING FOR HIGH POWER APPLICATIONS (4-12VIN)REFERENCE DESIGNThis reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MP5470 PMIC has 4x bucks, Vin range 6.5V to 16V, I2C support and available in a 3x4mm QFN package. ...
-
REFERENCE DESIGN
SPARTAN 7 PMIC SOLUTION WITH POWER SEQUENCING FOR HIGH POWER APPLICATIONS (5VIN)REFERENCE DESIGNThis reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements MP5416 PMIC with 4x bucks, 5x LDOs Vin 2.8V to 5.5V I2C support QFN-28 (4mmx4mm) Cost effective Small Foot...
-
REFERENCE DESIGN
SPARTAN 7 SMALLEST SIZE MODULE SOLUTION (HIGH POWER APPLICATIONS)REFERENCE DESIGNThis reference design is intended for powering AMD Xilinx Spartan7 family of FPGAs (S6 - S100). This PMIC Module based solution combines a small footprint with good efficiency and tight regulation for a low cost solution. The internal sequencer ensures power up and power down sequencing requirements. MPM54304 has 4x bucks, Vin range of 4V to 16V, I2C support and is available in a 7mmx7mm LGA packa...
-
REFERENCE DESIGN
WIFIREFERENCE DESIGNMPS works closely with Qualcomm to create power solutions for all their WiFi products supporting 802.11ax including WiFi6 standards with 2.4GHz/5GHz/6GHz bands The MPS components on these reference designs are carefully selected to meet price and performance objectives of these designs. Please contact your regional MPS contact or use the displayed link below for assistance
-
REFERENCE DESIGN
ARTIX 7 - PMIC REFERENCE DESIGNREFERENCE DESIGNContact MPS with exact requirements
-
REFERENCE DESIGN
ZYNQ ULTRASCALE+ RFSOC INTERNAL SEQUENCING POWER MANAGEMENT REFERENCE DESIGNREFERENCE DESIGN -
REFERENCE DESIGN
KINTEX INTERNAL SEQUENCING POWER MANAGEMENT REFERENCE DESIGNREFERENCE DESIGN -
REFERENCE DESIGN
ZYNQ ULTRASCALE+ U4EG/U5EG/U7EG ADAS CENTRAL COMPUTE ENGINE POWER REFERENCE DESIGNREFERENCE DESIGN -
REFERENCE DESIGN
ZYNQ ULTRASCALE+ MPSOC U2EG/U3EG ADAS SENSOR AND PROCESSING FOR CAMERA POWER REFERENCE DESIGNREFERENCE DESIGN -
REFERENCE DESIGN
ZYNQ ULTRASCALE+ MPSOC 5 RAIL INTERNAL SEQUENCING POWER MANAGEMENT REFERENCE DESIGNREFERENCE DESIGN -
ARTICLE
PLANNING FOR SUDDEN POWER FAILURES WITH THE MP5515ARTICLEPower failures tend to cause a domino effect of disruptions, resulting in system failures and data loss, as well as damage to servers and equipment. This article describes how to use the MP5515 to protect solid-state drives (SSDs) against sudden power failure. There are three main issues if an SSD experiences a power failure: The MP5515 is an input power conditioning PMIC that provides a compact...
Log in to your account
Create New Account