- MP1916
MP1916
Session textval
Session Titefor popup
Description
The MP1916 is a MOSFET driver designed to drive enhancement-mode gallium nitride (GaN) MOSFETs and N-channel MOSFETs with low gate voltages in half-bridge or synchronous applications. The device has independent high-side (HS) and low-side (LS) pulse-width modulation (PWM) inputs.
The MP1916 employs MPS’s proprietary bootstrap (BST) technique for the HS-FET driver voltage, and can operate up to 100V. The BST charging technology prevents the HS-FET driver voltage from exceeding the supply voltage (VCC), which prevents the gate voltage (VGATE) from exceeding the enhancement-mode GaN MOSFET’s maximum gate-to-source voltage (VGS) rating.
The MP1916 has two separate gates for independent MOSFET turn-on and turn-off speed control by adding impedance to the gate loop.
The MP1916 is available in a WLCSP-12L (2mmx2mm) package
-
Show more
Show less
Features & Benefits
- Independent High-Side (HS) and Low-Side (LS) Logic Inputs
- High-Side MOSFET (HS-FET) Floating Bias Voltage Rail Operates Up to 100VDC
- Separate Gate Outputs for Adjustable Turn-On and Turn-Off Speed Control
- 4.5V to 5.5V Supply Voltage (VCC) Range
- 0.2Ω Pull-Down Resistance and 1.3Ω Pull-Up Resistance
- Fast Propagation Time (Typically 17ns)
- Excellent Propagation Delay Matching (Typically 1.5ns)
- Available in a WLCSP-12L (2mmx2mm) Package
Active Part Numbers:
MP1916GC-Z MP1916GC-P
Part numbers ending in P and Z are the same parts. P and Z only indicates reel size.
Meaning of P & Z
MP1916 Resources
-
APPLICATION
POWER BANKSAPPLICATIONPower banks are an increasingly popular option for charging consumer electronics on the go. Because of the devices portable nature, power bank designs need to maintain a small overall size and be easy to use for end consumers. As fast charging is becoming a more widespread industry trend, power banks must offer the fastest safe charging possible with minimal thermal dissipation and the ability to ...
-
APPLICATION
POWER TOOLSAPPLICATIONPower tools offer a wide variety of features to a range of customers from everyday consumers doing small home improvement projects to construction and maintenance professionals. Because of this, power tool designs often demand high flexibility and have strict power and safety requirements. Both cordless and corded power tools must be able to offer high efficiency in compact sizes, without sacrific...
-
PRODUCT CATEGORY
MOSFET DRIVERSPRODUCT CATEGORY -
PRODUCT
MP1907PRODUCT100V, 2.5A, High Frequency Half-bridge Gate Driver
-
PRODUCT
MP1918PRODUCT100V, High-Frequency, Half-Bridge GaN/MOSFET Driver
-
PRODUCT
MP8699BPRODUCTHalf-Bridge GaN MOSFET Driver
-
PRODUCT
MPQ1918-AEC1PRODUCT100V, High-Frequency, Half-Bridge GaN/MOSFET Driver, AEC-Q100 Qualified
-
PRODUCT
MP1909PRODUCT30V,2.2MHz,2AHalf-BridgeGateDriverinSOT583Package
-
PRODUCT
MP1907APRODUCT100V, 2.5A, High-Frequency Half-Bridge Gate Driver
-
PRODUCT
MP1917APRODUCT100V, 4A, High-FrequencyHalf-Bridge Gate Driver
-
PRODUCT
MP18021APRODUCT100V, 2.5A, High Frequency, Half-Bridge Gate Driver
-
PRODUCT
MP18021PRODUCT100V High Frequency, N-MOSFET Half-Bridge Gate Driver with 1ns Matching Delay
-
PRODUCT
MP18024PRODUCT100V, 4A, High Frequency, Half-Bridge Gate Driver
-
PRODUCT
MP1906PRODUCT80V, Half-Bridge, Gate Driver
-
ARTICLE
DESIGNING MULTIPLE INDEPENDENT AUXILIARY POWER SUPPLIES WITH MAGNETIC ISOLATIONARTICLEIn a DC/DC converter, the auxiliary power supply of multiple switching devices requires independent isolated power supplies. Taking a full-bridge converter as an example, the high-side and low-side MOSFETs (HS-FETs and LS-FETs, respectively) of the bridge arm require isolated power supplies for the gate driver circuit. The traditional scheme uses a bootstrap circuit to power supply both the upper ...
-
ARTICLE
OPTIMIZING POWER SUPPLY EFFICIENCY WITH MOSFET SELECTIONARTICLEWhen designing power supplies, it is always critical to optimize the design for efficiency. Increased efficiency saves energy, reduces heat generation, and can even reduce the power supply’s size. This article will discuss how to choose the ratio between the number of high-side MOSFETs (HS-FETs) and low-side MOSFETs (LS-FETs) to improve efficiency in power supply designs. Figure 1 shows a simpli...
-
ARTICLE
MPS’S OPEN-SOURCE EMERGENCY VENTILATOR WITH EMOTIONTM AND BATTERY BACKUPARTICLEAs COVID-19 spread in March of 2020, the global shortage of emergency ventilators was one of the biggest concerns. The increasing demand in ventilators meant they would soon be out of supply, so a team at Monolithic Power Systems (MPS) sought to help create a solution to this crisis. While MPS is not a medical device manufacturer, its engineers and designers are highly experienced with power elect...
-
PRODUCT
MPM3599PRODUCT45V, Dual 12A, Single 24A, Buck Power Module with I2C
-
PRODUCT
MP8880APRODUCT60V, 4.5A, High-Efficiency, Digital, Configurable, Synchronous Step-Down Converter with PMBus Interface
-
PRODUCT
MAQ600APRODUCTHigh-Accuracy,
-
PRODUCT
MP2761PRODUCTI2C-Controlled, 2-Cell to 4-Cell Buck-Boost Charger with NVDC Power Path Management
-
PRODUCT
MP1653NPRODUCT16V, 3A, 1.1MHz, High-Efficiency, Synchronous Step-Down Converter in an SOT563 Package
-
PRODUCT
MP2462PRODUCT32V, 2A, 800kHz, Synchronous Step-Down Converter
-
PRODUCT
MP1652NPRODUCT16V, 2A, 1.1MHz, High-Efficiency, Synchronous Step-Down Converter in an SOT563 Package
-
PRODUCT
MP4423CPRODUCT6A, 36V, Step-Down Converter with Configurable Frequency
Log in to your account
Create New Account