- Evaluation Tools
- Vin Max>44V
Industrial Grade, 55V, 2.5A Programmable Frequency LED Driver
You have a basic account.A myMPS+ account is needed.Upgrade to myMPS+
Session Titefor popup
The MPQ2483A is a 55V LED driver suitable for either step-down or inverting step‑up and step-down applications. It achieves a 2.5A peak current with excellent load and line regulation over a wide input supply range.
The MPQ2483A incorporates both DC and PWM dimming into a single control pin. The separate input reference ground allows for direct enable and dimming control for positive-to-negative power conversion.
Current-mode operation provides fast transient response and eases loop stabilization. Full protection features include cycle-bycycle peak current limiting, output over-voltage protection (OVP), open-string protection, output short-circuit protection (SCP), and thermal shutdown.
The MPQ2483A requires a minimal number of readily available, standard, external components and is available in 10-pin QFN (3mmx3mm) and 14-pin SOIC14 packages.
- Show more Show less
Log in to your account
Create New Account
Features & Benefits
- 2.5A Maximum Peak Current
- Buck or Buck-Boost Modes
- Wide 4.5V to 55V Operating Input Range
- 0.28Ω Internal Power MOSFET Switch
- Analog and PWM Dimming
- 0.198V Reference Voltage
- 5μA Shutdown Mode
- Stable with Low ESR Capacitors
- Cycle-by-Cycle Over-Current Protection (OCP)
- Thermal Shutdown, Over-Voltage (OVP), Short–Circuit (SCP), and Open-String Protection
- AEC-Q100 Qualified
EVQ2483-S-00A Evaluation Kit 55V, Programmable Frequency White LED Driver Evaluation Board AEC-Q100 Qualified
The MPQ2483 is a 55V, white LED driver suitable for either step-down or inverting step‑up/down applications. It achieves 2.5A peak current over a wide input supply range with excellent load and line regulation. Current mode operation provides fast transient response and eases loop stabilization. Fault condition protection includes thermal shutdown, cyclebycycle peak current limiting, input over voltage protection, open strings protection and output short circuit protection.
The MPQ2483 incorporates both DC and PWM dimming onto a single control pin. The separate input reference ground pin allows for direct enable and/or dimming control for a positive to negative power conversion.
The MPQ2483 is package in SO-14.