You have a basic account.A myMPS+ account is needed.Upgrade to myMPS+
- 2.7V to 6V Input Voltage Range
- Up to 6A Load Current
- Internal 32mO High-Side and 15mO Low-Side Power MOSFETs
- I2C-Compatible Interface up to 3.4Mbps
- I2C-Programmable Output Range from 0.6V to 1.235V in 5mV Steps
- Factory Adjustable Switching Frequency from 0.85MHz to 2.2MHz
- Power-Saving Mode Selectable via I2C
- Internal 1ms Soft Start
- Power Good Indicator
- Current Overload and Thermal Shutdown Protection
- Available in a QFN-15 (2mmx3mm) Package
- fsw (max) (kHz)2200
- Vin (min) (V)2.7
- Vin (max) (V)6
- Iout (max) (A)6
- Isw Limit (typ) (A)11
- Vfb (typ) (V)0.6
- Iq (typ) (mA)0.3
- Regulated Outputs1
- Vout (max) (V)1.235
- Vout (min) (V)0.6
- Mps StatusActive
- PackageQFN-15 (2x3)
- Control Mode Hysteretic
- Common FeaturesLight-Load Efficiency, Power Good, Synchronous Rectification
- Special FeaturesDynamic Voltage Scaling, I2C Interface, Programmable Frequency, Programmable Output Voltage, Selectable Power-Saving Mode
Evaluation KitGET THIS KIT
The MP8848 is a highly integrated and high frequency synchronous step-down switcher with I2C control interface. It is optimized to support up to 6A load current over an input supply range from 2.7V to 6V with excellent load and line regulation.
Constant frequency hysteretic mode provides extremely fast transient response without loop compensation and easily achieves high efficiency under light load condition.
The output voltage level can be controlled, on-the fly through a 3.4Mbps I2C serial interface. Voltage range can be adjusted from 0.6V to 1.235V in 5mV steps.
Voltage slew rate, switching frequency and power savings mode are also selectable through the I2C interface.
The MP8848 requires a minimum number of readily available standard external components and is available in the compact QFN 2mmx3mm package.
US$ 25.00 + tax