17V, 8A, 700kHz, High-Efficiency, Synchronous, Step-Down
You have a basic account.A myMPS+ account is needed.Upgrade to myMPS+
The MP8770 is a fully integrated, high-frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs. The MP8770 offers a very compact solution that achieves 8A of continuous output current with excellent load and line regulation over a wide input range. The MP8770 uses synchronous-mode operation for higher efficiency over the output current-load range.
Constant-on-time (COT) control operation provides very fast transient response, easy loop design, and very tight output regulation.
Full protection features include short-circuit protection (SCP), over-current protection (OCP), under-voltage protection (UVP), and thermal shutdown.
The MP8770 requires a minimal number of readily available, standard, external components and is available in a space-saving QFN-16 (3mmx3mm) package.
- Wide 4.5V to 17V Operating Input Range
- 8A Output Current
- 22mΩ/10mΩ Low RDS(ON) Internal Power MOSFETs
- 100μA Quiescent Current
- Output Adjustable from 0.6V
- High-Efficiency Synchronous Mode Operation
- Pre-Biased Start-Up
- Fixed 700kHz Switching Frequency
- External Programmable Soft Start-Up Time
- EN and Power Good for Power Sequencing
- Over-Current Protection (OCP) and Hiccup
- Thermal Shutdown
- Available in a QFN-16 (3mmx3mm) Package
- fsw (max) (kHz)700
- Vin (min) (V)4.5
- Vin (max) (V)17
- Iout (max) (A)8
- Isw Limit (typ) (A)10
- Vfb (typ) (V)0.6
- Iq (typ) (mA)0.1
- Regulated Outputs1
- Vout (max) (V)12
- Vout (min) (V)0.6
- PackageQFN-16 (3x3)
- Control ModeCOT
- Common FeaturesPower Good, Synchronous Rectification
Evaluation KitGET THIS KIT
The EV8770-Q-00AEvaluation Board is designed to demonstrate the capabilities of MPS’ MP8770, a fully-integrated high-frequency, synchronous rectified, step-down, switch-mode converter with internal power MOSFETs. It offers a very compact solution to achieve a 8A continuous output current over a wide input range, with excellent load and line regulation. The MP8770 has synchronous-mode operation for higher efficiency over the output current-load range.
Constant On-Time control operation provides very fast transient response and easy loop design as well as very tight output regulation.
Full protection features include SCP, OCP, UVP, and thermal shutdown.
The MP8770 requires a minimal number of readily-available, standard, external components and is available in a space-saving QFN-16 (3mmх3mm) package.
US$ 25.00 + tax