36V, 5V Output, 2.5A, USB Charger
mEZS91202A is a USB charger module with 7-36V input, 350kHz, 2.5A load current, 5V output and offering up to 95% efficiency.
- 7V to 36V Wide Operating Input
- 2.5A Load Current
- 5V Output Voltage
- Open Design Files and BOM
- Over-Current Protection
- Over-Temperature Protection
- Line Drop Compensation
- DCP for BC1.2, Divider Mode, and 1.2V/1.2V Mode
- Special FeaturesLine Drop Compensation, OCP, OTP
- Package Size: WxL (mm)45x13
- Vout (min) (V)5
- Vout (max) (V)5
- Operating Temp Range (°C)-40
- fsw (max) (kHz)350
- Iout (max) (A)1
- Vin (max) (V)36
- Vin (min) (V)7
- Module Assembly Open Frame
- Module TypeFixed
2.5A, 36V, Frequency Selectable Step-Down Converter with Single USB Charging Port
The MP2496M integrates a monolithic, step-down, switch-mode converter and a single USB current-limit switch with charging port identification circuits. It achieves 2.5A of continuous output current with excellent load and line regulation over a wide input supply range.
The output of the USB switch is current limited. The MP2496M provides a USB dedicated charging port (DCP) which supports battery charging specification 1.2 (BC1.2), divider mode, and 1.2V/1.2V mode without the need of outside user interaction. The output voltage has programmable line-drop compensation.
Full protection features include hiccup current limiting, output over-voltage protection (OVP), and thermal shutdown.
The MP2496M requires a minimum number of readily available, standard, external components and is available in a QFN-26 (4mmx4mm) package.