EV4690GSD-00A

Active

Smart Bypass For LED Open Protection

  • 数量 价格
  • 1
    US$ 25.00 /unit

有货

Talk to an Engineer or get a Quote
Upgrade to myMPS+

Product Description

The MP4690 is a MOSFET based smart bypass for LED open protection, which provides a current bypass in the case of a single LED fails and becomes an open circuit. When the LED heals itself or is replaced, the MP4690 automatically resets. This device features very low voltage drop so that the conduction loss is very small during the protection. It achieves excellent thermal performance and energy efficiency.

LED lighting requires high reliability, especially in applications, such as automobiles, aircrafts, and streetlights. The MP4690 is used in parallel with each LED so that when one LED fails, other LEDs in the same string can still function normally.

Product Features

  • Simple Two Terminal Device
  • Automatic Reset if the LED Heals itself or is Replaced
  • 0.22Ω Typical On-state Resistance
  • Less than 1µA Off-state Current

Parametrics

  • IC Supported 1MP4690

Monolithic IC

GET THIS IC

IC Details

The MP4690 is a MOSFET based smart bypass for LED open protection, which provides a current bypass in the case of a single LED fails and becomes an open circuit. When the LED heals itself or is replaced, the MP4690 automatically resets. This device features very low voltage drop so that the conduction loss is very small during the protection. It achieves excellent thermal performance and energy efficiency.  LED lighting requires high reliability, especially in applications, such as automobiles, aircrafts, and streetlights. The MP4690 is used in parallel with each LED so that when one LED fails, other LEDs in the same string can still function normally.  The usage of the MP4690 is not limited to just LED loads. It can also be used with other loads where open protection is required.  The MP4690 is typically used with 1W-2W. LEDs. The device is available in a SOD123 package.